Extreme Wrenching

Discussion in 'Modifications & DIY how-to' started by shiftynick, Mar 17, 2008.

  1. shiftynick

    shiftynick Member

    Everybody knows that swapping out the up-pipe can be a big PITA, but this weekend I discovered a way to bump that up a notch. (My old one had a crack all the way around the weld to the bottom flange.) I started the breakdown Friday night, oh, about 20 minutes before the giant downtown tornado headed straight towards my house (which ended about two miles before my house :eek3:). When I did open the door to see what the ruckus was it knocked me over. At this point I have no power, but nothing else to do, so the work continues, in the dark. Also at this point I elbow the pressure hose connection on the intake duct, snapping it off. Joy. Took a break overnight so that I could be prepared to shoot the looters :naughty:. Continued the next day still with no power and now only warm beer. Right after my buddy pulled up to help the hail came through. We scrambled to pull my car down and slide it forward so he could get at least part of his car in the garage. He got hit pretty hard but didn't initially see that much damage. I also crushed my thumb trying to get the EGT off the old pipe. Its black now. Then thanks to a special delivery from Will with the last two gaskets I needed we were able to work into the night getting everything back on, in the dark. And then as I was tightening the very last bolt on the down-pipe hanger when the power finally comes back on after 30 hours. Figures.

    It was all worth it though because the car is running the smoothest I have ever had it run. And I love it again. :ddirty:
     
  2. Berzerklo

    Berzerklo Active Member

    Wow... that is something to be proud of... tornados be damned!

    EGTs are the biggest PITA eva.
     
  3. Matt

    Matt Think before you post Staff Member Supporting Member

  4. WJM

    WJM Banned

    those sensors are overrated. Death upon them.
     
  5. FACE

    FACE Active Member

    Shoot any looters?
    :rofl:
     
  6. Berzerklo

    Berzerklo Active Member

    Or Luters?

    [​IMG]
     
  7. FTZ

    FTZ ^.^

    This thread is pointless without pictures of the Black Thumb
     
  8. shiftynick

    shiftynick Member

    As soon as we get internet again....

    :cool:

    Just 2 out 3. I can't believe that one got away, but I wounded him, so he probably didn't get too far.

    Yeh, it was pretty easy to find. Though was about the shadiest parts exchange ever. Just Will standing under a street light beside some apartments, we just pull up grab the parts and go. I was thinking maybe I would get some crack out of the deal. And for the flashlight, if it needs a graph to explain how good it is, it's probably more than I need.
     
  9. Matt

    Matt Think before you post Staff Member Supporting Member

    :rofl: :rofl:

    Ironically, my neighborhood is about the safest in the area!! That's why I bought my condo there!

    we have other lights in stock without graphs! :p
     
  10. nsvwrx

    nsvwrx Active Member

    yeah i know we spent a good 6 hrs trying to get my up pipe out.
     
  11. shiftynick

    shiftynick Member

    Just an update. The car is running like crap again. I'm guessing I have a leaky gasket somewhere. I already knew I got a bad seal on the downpipe to catback gasket. Would a leak there cause problems worse than just stinkyness?
     
  12. nsvwrx

    nsvwrx Active Member

    no that shouldnt be too much of an issue.
     
  13. Slowsoul

    Slowsoul Member

    Maybe it is different on a02 WRX, but...my up pipe install really wasn't bad...at all...like 3hrs, tops.

    Sorry about your thumb.

    Where in East Atlanta are you?
     
  14. shiftynick

    shiftynick Member

    I think all in all it took me about 4 hours, just spread out over a couple days while I waited for parts/electricty.

    I'm right off Flat Shoals by 20. Just listen for the gunshots and ghetto birds.
     

Share This Page