4/19: WRXAtl Dyno Day ft. BATLground Engineering (Payment Info Updated)

will your 4eat lock in 4th gear without downshifting?

 

itll lock in 2nd..


well actually thers an overdrive lock...

 

Why not?! I wanna see what that beast is putting down! We need someone to rep for the Subies!

 

I'd ask SS or Doug at TS.....i'm pretty sure it has to lock in 4th for you to get the right numbers....

 

The numbers only vary a little bit from gear to gear, but the spool will be faster in 3rd or 4th than it will in 2nd.

 

cant we just turn overdrive off?

 

maybe...i'll do a quick search and find out!!

 

ill come just to come and hang out

 

You will be able to hold 3rd to 112mph according to the manual. This will prevent the car from shifting into overdrive as it will in D )


Seems like putting in 3rd kills the overdrive

 

sounds like it can be done.....here's a thread i found on clubwrx

http://www.clubwrx.net/forums/showthread.php?t=159312

 

Good stuff, the list is growing.

 

Ill be dynoing the bugeye at some point during the day. Its almost back together.

 

I take it that said bugeye is a beast?

 

its, it sure is... too lazy to search for the thread

 

I talked Kieran from Gte today he will be there.

 

http://www.wrxatlanta.com/forums/showthread.php?t=14478

 

Over 500whp on pump gas at 18lbs.

We will be over 30lbs for the dyno day.

Matt

 

prices on dyno set?

 

I'm not sure what you mean.

Matt

 

as in how much is it going to be?

 

Oh I think its $45.00 to dyno.

 

My M3 has a dyno mode, can we enable it?

1. Allow car to warm up
2. Strap car on Dyno
3. Start car, push DSC once so light is illuminated
4. Run Car to 6k in gear
5. Shut engine off but do not remove key, go to position 1 with key
6. Turn key to position 2
7. Press DSC button for 20 seconds
8. Release DSC
9. Start car by turning key from postion 2 ( the same place you left it from step 6) starting postion 3
10. Press sport button and begin to dyno car

 

Should be no problem,

 

:eek3: Wowzers. That sure is a beast.

 

have you ever gotten it to work joe?

I can never get mine to work.

 

i want to be on the list? when can i pay!?

 

Paid in full, today!!

 

alex did you get my pm?

 

Paid in FULL!

 

Updated the list...

 

Do to some management changes at my store. I will need to back out of this.:wtc: Have fun.

 

i toke you off the list....

 

I just can't really justify spending the money right now. Things may change in the next few days, so I'll let you know, because I would like to get some numbers with the exhaust. I'm curious.

 

It's ok I still have a job.

 

Trying to save my pennies for a new transmission. I don't expect the stock 5mt to take the power for too long. It certainly won't last on a dyno.

 

It will last better on the dyno than it will on the street

 

I have opened Sunday up to the 240Atlanta guys as well.

 

ssh:

jk jk. :keke: Should be fun.

 

...and Gals...


Sup Greg!

:wavey:

 

Yes....and Gals

 

Ok, I'm back in the game. Paid in full! See you guys on the 19th!