Wheel Tire Fitment Question

Discussion in 'Modifications & DIY how-to' started by supastar84, Jun 29, 2009.

  1. supastar84

    supastar84 New Member

    I've got a 2006 Saab 92x (pretty much the same as Subaru Impreza RS Wagon). The suspension is stock (as is everything else), and I plan to keep it that way. I'm looking at buying a used set of wheels and tires and trying to determine if they will fit without me having to do any modifications.

    Here is the specific details:
    18" x 8.5" 5Zigen PRORACER ZR+520 wheels with Falken Azenis ST115, 235/40zr18 tires. Bolt pattern is 5x100 with 47+ offset.

    Anybody know? Thanks!
     
  2. undrgrndrdr15

    undrgrndrdr15 Active Member

    i would say yes... i was lowered on prodrive blue with 18x8... stock you should be fine...
     
  3. yerrow

    yerrow Active Member

    they'll fit, but it might be tight if and when you lower it. as it is on the stock suspension its gonna look pretty silly because the wheel gap is going to be exaggerated.

    the 8.5 width is probably gonna be a challenge as most wagon people, myself included stop at about an 8 inch width and about a 225 tire.

    it can be done, just not sure how much work its gonna be if at all.

    Also iirc the offset is a +46 cuz those are the same wheel and specs i have on the forester
    [​IMG]
     
  4. GregT

    GregT Member

    this, 48mm is pushing it, I had to roll the fenders with a 225 on a 17x8 on my wagon. but I'm tucking a little tire also.
     
  5. supastar84

    supastar84 New Member

    I'm thinking about backing out of the deal then. I really like the wheels, but I don't want to have to do any modifications and it sounds like these are really pushing it. Thanks for the responses!
     

Share This Page