more problems, intake

Discussion in 'Modifications & DIY how-to' started by AtlxPat, Sep 25, 2009.

  1. AtlxPat

    AtlxPat Active Member

    so my intake snorkus was ripped off in the past weeks water fest, i bought a short ram off of a member on here and installed it, afterward i felt some jolts (as if i stepped off the throttle) usually around 2500-3000rpm and when my turbo kicks in i do not feel any power,as if someone disconnected my turbo. I have a boost gauge and it was reading out correctly.

    if i pull out my negative connection, will it reset my cobb stage 2 map? my cobb is broken and is on the way to cobb to be fixed
     
  2. wagunz_pwn

    wagunz_pwn Active Member

    Wirelessly posted (From Your Mom's House)

    as long as it's the base map...you're fine. If it's a real-time map...you will lose it.
     
  3. AtlxPat

    AtlxPat Active Member

    base map is the OTS map from cobb right?
     
  4. Mike@TTR

    Mike@TTR Active Member

    APv2 or 1?
     
  5. AtlxPat

    AtlxPat Active Member

  6. Mike@TTR

    Mike@TTR Active Member

    base and realtime are the same. Reset away f you want, but depending on the intake it may need to be tuned for.
     

Share This Page