Got a few questions...

Discussion in 'General Community' started by jesus888, Oct 1, 2010.

  1. jesus888

    jesus888 Member

    SO... my RE01Rs on stock rims (2005 STi) are starting to make me nervous... so I've had my eye out for some new tires.

    I shoulda bought the ones that were on the boards a couple weeks ago, b/c I like the look of the SVNs a bunch, but they got eaten up. SO, I found these and sent the paypal last night.

    Now for questions (and there are a few):
    1. Will I need to do anything to make this wheel/tire combination fit (as far as rubbing etc goes)
    2. I'm kind of looking to get the car "refreshed", especially related to my front bumper (paint chips and attachment points kinda blah). Where should I go to get it touched up and attached TIGHTly. Oh, and how much do you think it may cost?
    3. Also CONSIDERING possibly moving away from my RCE Yellows to tighten up the ride but also make it more comfortable as a daily driver. THinking about the BC Coilovers (BC Series)... question is... do I get buy from a vendor online and find someone local to install or take it to a local shop? And just curious about thoughts on the actual Coilovers...
    4. Next up, I bought some spark plugs a while back, and just found em in my trunk yesterday... thought I had gotten them installed. So... with 83k on the car, and OEM sparkplugs... where should I get this done, and about how much will it cost? (Maybe could be done at same time as the coilovers (if that happens :) )
    5. Next, Ped did my dif/trans fluid changes about 35k ago... is it time to do it again
    6. And Lastly... with 83k on the clock, when do I do my timing belt? And are there any other major maintenance items I need to consider?

    If you can't tell... I'm basically looking to refresh the car so I don't feel like buying a new one anytime soon... I think it can be done without breaking the bank... thoughts?
     
    Last edited: Oct 1, 2010
  2. Jake

    Jake Active Member

    wait...what did you buy? wheels and tires? or just tires? sizes?
     
  3. jesus888

    jesus888 Member

    Sorry... these wheels: here

    They are 18x8.5 +48 5x114 Rota SVN's with 245/40/18 bridgestone potenza RE-01R's.
     
  4. FTZ

    FTZ ^.^

    If you want a softer ride for Daily Driving, don't get Coilovers. If you decide to get Coilovers, don't pay for installation, do it yourself. It is not hard.

    We just swapped out RoMe's suspension a couple weeks ago at Ped's. It took about 3 hours from start to finish. I am sure if you asked Ped, he would be willing to help, and I would be happy to come over and lend a hand as well. We can also replace your Spark Plugs at the time.

    You are close enough to the mileage to replace the fluids again, and just like everything else, we can do it at Ped's.

    Timing Belt replacement is at 90K or 120K, check your owners manual.

    All the above can be done with the help of a friend or two, and save you a shit-ton of money as opposed to paying a shop to do it. Offer up a case of beer and pizza and I am sure you would have volunteers to help do the work.
     
  5. jesus888

    jesus888 Member

    So BC's aren't gonna be much better than my RCE yellows?
     
  6. RSConvert

    RSConvert ɹǝuɹnʇpɐǝɥ uʞnɟɐɥnɯ ɐ sʇı Supporting Member

    Prior to going to BC I had a Tein and Koni yellow setup (which I thought was perfect, for me). But if I could do it again I'd buy BC CO first.. Perfect set up for the money. +1 on what 420 said...they are pretty easy to install.
     
  7. Alex

    Alex Community Founder Staff Member

    Oh god, what have you done!?
     
  8. pEd

    pEd This ain't no Piccadilly!

    I'd watch out for that pEd guy. He's a shady mo-fo.

    Let me know I I can help out at all ;)
     
  9. jesus888

    jesus888 Member

    You da man pED...

    So here's another question...

    I have 83k miles on my car... and I've had yellows for the last 30k... when is it time to replace the struts? That's kinda why I'm even considering coilovers... because if I'm gonna spend money on the struts and go through the install (still with stock sway bars, etc) why not spend a little more for the coilovers?

    Honestly I don't even know how much decent struts cost :) Thoughts?
     
  10. integroid

    integroid Supporting Member

    Get the BC Coil Overs. I wish I would have done that to begin with. Love mine and they can't be beat for the money.
     
  11. RSConvert

    RSConvert ɹǝuɹnʇpɐǝɥ uʞnɟɐɥnɯ ɐ sʇı Supporting Member

    83K miles ago :rofl:

    Very decent struts KONI (front:8610-1351SPORT rear:8610-1440SPORT) probably 800+.

    BC BR series run anywhere between $950-1200

    So, def spend a little more for the coilovers. You won't regret it



     
    Last edited: Oct 3, 2010
  12. jesus888

    jesus888 Member

    It's sounding more and more tempting............................
     
  13. RSConvert

    RSConvert ɹǝuɹnʇpɐǝɥ uʞnɟɐɥnɯ ɐ sʇı Supporting Member

  14. jesus888

    jesus888 Member

    Cicio mentioned $900ish... without rear camber plates. There's a place on iwsti that advertises as the only authorized "dealer" and mentioned that their prices are guaranteed the lowest anywhere... and probably no tax. IF I go that route... do I need the rear camber plates? And what spring rates? 99% road... lots of interstate with a dream of tracking years away...
     
  15. FACE

    FACE Active Member

    For sure do work yourself with some help...fold your money up and put it in your pocket!

    I would love to lend a hand if I'm not working!

    How are those speakers sounding btw?
     
  16. superdoughboy4

    superdoughboy4 Active Member

    Let's all lend a hand. Lol. A good old fashioned mod meet... For one person. Lulz.
     

Share This Page