Spring Install Day - All Pro Subaru 4/10/2011

Discussion in 'Meetups & Events' started by Matt, Mar 15, 2011.

  1. John

    John Active Member

    Brandon isn't the only one that recommends that lol
     
  2. Trancetto

    Trancetto Active Member

    too messy.
     
  3. FTZ

    FTZ ^.^

    Are you serious?

    If changing your own oil is too messy, I demand you leave WRXatlanta immediately, and never return. Or are you afraid a little oil might ruin your fresh manicure?
     
    Last edited: Apr 8, 2011
  4. achong

    achong New Member

    I'll be there to check it out. I don't have anything to install though.
     
  5. Jake

    Jake Active Member

    if you CAN'T change your own oil, then a WRX, SHIT a Subaru is NOT the car for you. there will be a time when you have to get your hands dirty. and the oil change is the basic of basics
     
  6. superdoughboy4

    superdoughboy4 Active Member

    Lolllllll

    For me, the only "too messy" would be accidentally not having the oil catcher in the right spot as it spews out and spilling all over the parking lot.
     
  7. bixs

    bixs Supporting Member

    bring everything you need to change your oil. Make him look like a.... lulz :p
     
  8. XanRules

    XanRules Active Member

    Gaskets won't be in until Monday :|

    So I'll be wrapping my turbo and helping out as best I can in the morning.
    Maybe do some fender braces if I have time.
     
  9. superdoughboy4

    superdoughboy4 Active Member

    Hahah.
    Also, hopefully the person who did the Front Lower Tie Brace write up knows the torque spec for the bolts on the subframe.
    I just asked a few minutes ago on the boards as someone PMed him/resurrected the thread.
    I wish I could afford more of the GTSpec parts.
     
  10. 07Ltd#767

    07Ltd#767 The Neighborhood Drunk

    subframe bolts use TAF torque specs
     
  11. bixs

    bixs Supporting Member

    i stripped one like that on mine. figured it was just a frame bolt
     
  12. 07Ltd#767

    07Ltd#767 The Neighborhood Drunk

    putting it on? lol, not that tight...pb blaster is your friend for those bolts come take off time
     
  13. Cool_____

    Cool_____ Banned

    LOL

    WRXAtl members after working on car:
    [​IMG]

    Broken after getting car worked on:
    [​IMG]



    Just kidding dude.
     
  14. bixs

    bixs Supporting Member

    putting it on TAF. (Actually believe it was faulty to begin with because I didn't even tighten it that much but that ruins my "do it right" point :hs: )
     
  15. Trancetto

    Trancetto Active Member

    LOL at you demanding. Sorry, I live in an apartment, ain't no way I'm going to jack the car in a parking lot and have it spill everywhere. And oil has been changed today.


    Exactly.


    Where did I say that I can't? I choose not to. I've got cuts, bruises, black hands that couldn't wash off for days working on it.
     
    Last edited: Apr 8, 2011
  16. Cool_____

    Cool_____ Banned

    I get pissed when I'm changing the oil in the yard and all is well.....until the wind blows and changes the direction the oil is flowing....
     
  17. Trancetto

    Trancetto Active Member

    Why go through all that trouble when you can take it to a shop down the street, have them do it for 25 bucks. After buying the oil and time spent doing it, 25 bucks is a joke.
     
  18. 07Ltd#767

    07Ltd#767 The Neighborhood Drunk

    I'll step out on a thin branch here and say I agree w/ broken...I make too much money to lay on my garage floor and change the oil. That said, nobody ever touched my STi, less Ball, Nicad and Brett. Then again, I had enough money in that car to buy 4 well built bugeyes.

    My acura will never see me under it, inside of it, whatever. Hell, i didn't even know what the engine bay looked like until 3 months after i bought the car. Besides, dealership I bought it from gives 5 dollar oil changes...win

    edit: i'm agreeing in terms of my car...DD turd. Nobody ever changed the oil in the STi (or the land yacht) except me
     
  19. Cool_____

    Cool_____ Banned

    Well when you live in the sticks like I do and the closest shop is 20 mins away doing it yourself is easier and quicker and you 'know' it's done right.

    My buddy/co-worker who has a bugeye had his oil changed at the Subaru dealership once....when he left work I saw puffs of blue smoke so I called him and said dude you burning oil. Upon investigation they added oil and never changed his filter.....he had 7 1/2 qts oil in that thing which I just don't understand how you screw up that much. Was he 2 qts low and they just added new oil (doubtful as he never has had oil consumption issues) or did they not pay attention to how much oil they put in (they use the 55 gallons to 'pump' oil from).
     
  20. Cool_____

    Cool_____ Banned

    Heh rich city folks are lazy.
     
  21. Allpro Subaru

    Allpro Subaru Registered Vendor Supporting Member

    Hey guys,

    Just getting a definite number of ppl working on their cars, so we know how much space of the parking lot needs to be used. Please pm or post up what you are doing. Thanks dudes.

    LIST FOR PARKING LOT SPACE:

    1. josh booth
    2. Sparta
    3. John
    4. wagunz
    5. dough *but willing to share space with wagunz
    6. cMags
    7. Broken
    8. Megadeth2118
    9. Matto357
    10. K. Marx
    11. Xan Rules
     
  22. josh booth

    josh booth Active Member

    Pm sent....
     
  23. Trancetto

    Trancetto Active Member

    Meth Kit(It's a maybe)
    Turbo Inlet
     
  24. Trancetto

    Trancetto Active Member

    I'm pretty much willing to do anything on the car, BUT oil. I've taken my cars to same person for past 5 or so years, ever since i got my first car. I got my trust in him and I buy my own oil, he just jacks up the car, drains the old oil, puts in a new filter and adds my oil.
     
  25. John

    John Active Member

    PM sent
     
  26. cMags

    cMags Member

    I'll be there, doing a rear sway bar, catback swap, and saggy butt shims on the rear struts.
     
  27. superdoughboy4

    superdoughboy4 Active Member

    Maybe. If it doesn't fill up, I'll take one.
    All I really need to get installed is my Front Lower Tie Brace, and maybe springs, if anyone is up for helping me out.
     
  28. Allpro Subaru

    Allpro Subaru Registered Vendor Supporting Member

    Maybe wagunz and you can share a spot? ;)


     
  29. Allpro Subaru

    Allpro Subaru Registered Vendor Supporting Member

    Broken I texted you.
     
  30. superdoughboy4

    superdoughboy4 Active Member

    Not a bad idea. :wiggle:
     
  31. Allpro Subaru

    Allpro Subaru Registered Vendor Supporting Member

    ^fixed.

     
  32. John

    John Active Member

    I have my space for my car +1 guest that will be driving my old car (friend I sold it too) will be sharing the spot with me. We shouldn't be eating up the space for too long, so if someone needs it later on in the day that should be fine.
     
  33. Sparta

    Sparta Active Member

    are you counting the spaces in order or every other? Might get kinda crowded if every space is taken and everyone is rubbing elbows between cars trying to wrench
     
  34. John

    John Active Member

    Good point.

    Who says we have to stay inside the lines though? I'm sure spacing out a little bit wouldn't be a problem.
     
  35. josh booth

    josh booth Active Member

    Good point D I am changing out my carpet so I will need a little room with all doors open....
     
  36. Allpro Subaru

    Allpro Subaru Registered Vendor Supporting Member

    Just trying to get final count to get the logistics set.
     
  37. Matto357

    Matto357 Crazyazn likes Naps Staff Member

    If you guys find a fsb for me I'll be doing that. If not I'll be putting on rear hardened sway bar mounts
     
  38. John

    John Active Member

    Brandon@Allpro - are your BD clusters 120 or 140mph?
     
  39. Allpro Subaru

    Allpro Subaru Registered Vendor Supporting Member

    Will check tomorrow.

    -Patrick


     
  40. AutoxSTi

    AutoxSTi Member

    I'll be there to give a hand or two. Count me in.
     
  41. John

    John Active Member

    Thanks
     
  42. XanRules

    XanRules Active Member

    Wrapping turbo and maybe doing fender braces if time permits.
     
  43. C_wagginz

    C_wagginz Member

    I'm leaving out of Smyrna ~9:15 if anyone on this side of town wants to caravan up.
     
  44. Allpro Subaru

    Allpro Subaru Registered Vendor Supporting Member

    140mph

     
  45. John

    John Active Member

    Excellent thats what I need thanks for looking.



    On a side note - anyone in the douglasville, hiram, dallas, villa rica, carrolton, powder spring side of town....A few of us are meeting up at Wal-Mart in Hiram (at 278 and 92) to caravan up to Allpro. We will be meeting about 9am. Wheels up will be 930am. We will be on the far west side of the parking lot (close to behind where the Autozone is)
     
  46. Ill be there as well. Nothing to install but I'm always willing to turn a wrench.
     
  47. yerrow

    yerrow Active Member

    Any idea as to how long everyone plans on being there?

    Sent from my T-Mobile G2 using Tapatalk
     
  48. Allpro Subaru

    Allpro Subaru Registered Vendor Supporting Member

    Donnie,
    Be there at 10 and leave at 4 ;)

     
  49. John

    John Active Member

    still planning on burgers and dogs? and are drinks included?
     
  50. Alex

    Alex Community Founder Staff Member

    Ill be picking everything up tomorrow ;)

    Unfortunately, Sams club doesn't open till 10am. I'll pick up 2 liters to get us through in the morning.
     

Share This Page