Exhaust Database

Discussion in 'Modifications & DIY how-to' started by FACE, Feb 1, 2008.

  1. Eco Auto Clean

    Eco Auto Clean Active Member

    COBB TBE, heat shield and AP on the way!!!!...cant wait to post up once I get it!
     
  2. scoobaru

    scoobaru Active Member

  3. mckenzietj

    mckenzietj Member

    ported and smoothed stock manifolds and crossover, TXS cast up, Bosal catless divorced down and mid, SPT 3" cat back
     
  4. Exhaust on the RS is stock for now, but here's what I've done in the past:

    My STi had a TurboXS Stealthback, then a Helix DP/Ansa catback, then a Maddad midpipe and Afterburner Vortex axleback (with the Helix DP)..... Ansa was LOUD :bigthumb: Vortex is like a loud ScoobySport, love it :D

    My WRX's had ScoobySport components and then a full Helix TBE.....

    Still haven't figured out what to do with the RS yet.....
     
  5. WRXbryanATL

    WRXbryanATL Member

    as for now all i have is a catback, invidia n1 3"
     
  6. WRXCoupe

    WRXCoupe Active Member

    turbo xs up, Injen catted down 3", HKS HP Cat Back 3"
     
  7. FRCFED4

    FRCFED4 Member

    cobb DP, HKS Hi-Power catback
     
  8. Cool_____

    Cool_____ Banned

    MadDad Equal Length Headers, Maddad 3 bolt uppipe with atmospheric dump Tial 44mm EWG, ERZ downpipe, Greddy Evo2 Catback with resonator removed and replace with 3" piping. Screams like a banshee.
     
  9. Davidwrx

    Davidwrx Member

    Stromung ceramic coated shorty divorced WG DP, Stromung catted mid, STI axle back.

    Oh yes, also an STI catless up pipe.
     
    Last edited: Oct 9, 2008
  10. seanwrxwagon

    seanwrxwagon Member

    HUR Catless Up pipe, Invidia v4 catted divorced down pipe, Tanabe touring medalion cat back.
     
  11. WRXCoupe

    WRXCoupe Active Member

    Now that is an exhaust:bowdown:
     
  12. FACE

    FACE Active Member

    Bumped for the new folks to see and post your new mods ;)
     
  13. Eco Auto Clean

    Eco Auto Clean Active Member

    COBB Catted Turbo Back Exhaust
     
  14. Smokin_Joe

    Smokin_Joe Member

    stock up-pipe w/ cat
    stock dp w/ cats
    STI exhaust Catback

    overall: stock 04' XT

    *(reserves the right to EDIT)*
     
  15. cMags

    cMags Member

    Was running a Brullen catback but got tired of the drone. Backed off to an STi catback bolted up with a MS3 adapter (rotated flange and pipe extend/expand). Quite a bit quieter but still makes a nice rumble and flows great.

    Sent from my LS670 using Tapatalk
     
  16. thrasher722

    thrasher722 Member

    JDM up-pipe (no cats)
    COBB catted down-pipe
    COBB mid-pipe with 3" flange rotated and an extra 1/4" of 3" pipe added to fit axleback
    Perrin double tip axleback
     
  17. b reel

    b reel Active Member

    rotated 3" 2 resonators that say cat on them with an APS gutted can. sounds like a couple of carpenter bees fucking in a milk jug
     
  18. J_P

    J_P I like pudding pops Supporting Member

    Cobb catted DP wrapped, Greddy SE 3" CB
    I'm pretty happy with this setup. Low exhaust note.
     
  19. bjtyson3

    bjtyson3 Member

    invidia divorced Dp..custom 3" catless mid section,HKS hi power muffler
     
  20. Alex

    Alex Community Founder Staff Member

    Loved my Helix catted downpipe and modified Cobb catback on my 2004.
     
  21. blaster

    blaster my other ride is your mom Supporting Member

    And now I love it on my '06 wagon. Rumble rumble.
     
  22. RSConvert

    RSConvert ɹǝuɹnʇpɐǝɥ uʞnɟɐɥnɯ ɐ sʇı Supporting Member

    STI catless upipe
    Tanabe Concept G Blue Full TB
     
  23. FACE

    FACE Active Member

    Well I guess I should update what I now have...

    Cobb catted DP with the Perrin cat back heat wrapped

    :)
     
  24. Trancetto

    Trancetto Active Member

    straight pipe.
     
  25. slowwrx

    slowwrx Supporting Member

    Invidia Race Header, AMS\TopSpeed Rotated Piping, AMS Exhaust.

    All Ceramic Coated.

    Deep and awesome is the best way to describe it.
     
  26. Sparta

    Sparta Active Member

    Stock sti exhaust :)
     
  27. crazyazn

    crazyazn I like naps Staff Member Supporting Member

    Invidia divorced catless, 3in to 2.5in adapter, SPT catback. Fairly quiet but still has enough rumble for me, pretty sure the maddad whisper and borla hush is quieter tho.
     
  28. SubiNoobie

    SubiNoobie Supporting Member

    MadDad V2 Downpipe (catted, divorced), MadDad Whisper V3. I have about 4k miles on the exhaust and love it. Nice rumble, deep exhaust note, tame until ~3k, ~3k+ it opens up and sounds awesome.
     
  29. nik_05STi

    nik_05STi Member

    Stock up pipe, Helix down pipe, SPT cat back.
     
  30. crash#2

    crash#2 Member

    3" surewin v2 jethot coated black, helix catted dp
     

Share This Page