Does anyone make an EWG tumptube in a v-band that will accommodate a Tial 38mm wastgate utilizing a Perrin UP? I've checked out a couple vendors to see if Perrin made one or something. No luck. I searched a couple other boards but nothing. I can't imagine I'd be the first one to hack up their recirculated Perrin DP to go with a dumptube setup. If you know of something, please let me know. I can't even drive the car to an exhaust shop to have made as I'm not running that wastgate without the exhaust gases redirected elsewhere and not burning shit up. -Steve
Just drive it to the shop without getting into boost? What happened to the one that came with the rotated kit?
I wonder if this would work? http://cgi.ebay.com/ebaymotors/ATP-...r_Truck_Parts_Accessories&hash=item56435bbeed
I don't know of any shops that would have a v-band flange in house and I personally don't know of any local exhaust shops that are capable of mandrel tubing. During the initial installation, trying to get everything to bolt together on the wastegate was being a royal PITA so instead of me continuing to get frustrated with it, I had someone cut off the inlet tube that recirculated back into the DP thus allowing me to go VTA. Hope that makes sense? Hmm...that looks like it could work? Thanks for looking.
whoa!, $65 for a 8" tube?! i guess your run-of-the-mill exhaust shop doesn't stock v-band flanges? otherwise i would think something that short and small would be well under the $50 mark custom installed
being that most mandrel bending machines start at $25K used, you'll be hard pressed to find anybody with one let alone an exhaust shop. With that said there are a few fab shops that can weld up what you are looking for here on the south side, just got to know who to call.
Sorry I didn't see this earlier, but two things. One, we generally have a couple around the shop as well as the necessary steel. Two you can order just the flange and take it somewhere and just get one welded up.