Fixed the problem. The slave was fine. I was simply missing the spring on the top of the fork. I guess whoever was helping me last took it off...
Ok so I fixed the input shaft seal and that took care of the leak but the pedal is still feeling kinda funny. I'm down to two things. Needs to...
Yeah, no leaking in the car so I think master is good. No reason it would have gone out and it would have been too much of a coincidence for that...
:) Yeah I kinda cringed when I noticed he tranny wasn't quite on all the way when we hit the pedal but what can ya do... I checked it out and the...
Awesome! Thanks! For some reason I couldn't find anything googling... and I'm pretty good at google lol.
Yeah i think its input shaft since its deff. tranny fluid leaking. I hate that smell... I replaced everything and resurfaced the flywheel. The...
C'mon... Nobody has experience with this?
No waranty... I am thinking slave. I have played with the fork and it doesn't look like its binding but I can't really get it to do it when...
Anyone? Somebody on here gotta know something...
Ok, after my last clutch install, I've got a couple of small problems. I don't work on this car every day so I don't know it as well as I know...
FYI: http://240atlanta.com/forums/showthread.php?t=17754 ^ not nopi but same day same place...
I would say thats not fine. Compressor surge is never a good thing. Make sure the BOV still has a vaccuum. If it does then likely the seals in...
If you need help on getting a drift demo or something of the sort going, shoot me a PM. As long as you are clear of any legal implications I'd be...
Ah good :). Thanks. I just went and read about expansion valves so that makes sense... High side readings coming soon...
Yep! The longer you work on cars it seems the more you begin to expect the twist, turns and bumps in the road. :) The more you expect them, the...
Awesome! Both are downloading as we speak...
I also forgot to mention that I jumped the low pressure switch and compressor still did not come on. The low pressure switch is the one (if...
Thanks! And agreed, thanks to WJM. We got off to an iffy start but I think we're headed in the right direction. :) I've done pretty much...
Ok. I'll swing by a buddys shop and have the pressures tested with their gauges Monday. Thanks for the help... I'll report back with what I find.
Right now I've got the low side pressures to 25ish with the compressor on. I don't have a way to test high side right now since I just have a...
Separate names with a comma.