Separate names with a comma.
As most of you know I am preparing for the switch to E85 and needed larger injectors. I looked at several different options and decided to mod...
Well got the fuel pump and the injectors in today. The injectors turned out pretty darn good. They all flowed in the 820's and had less than 1%...
Any noise accompanying this? Does it sound like a leak or something? Did you use new OEM gaskets when you replaced the turbo? Any codes?
Same reason gas is expensive...sucks. I really hope the economy turns around. Just one MORE reason for the fairtax!! If anyone is not familiar...
Forgot to mention I should have a decent supply of adult beverages for those over 21 :)
Eh, put the car on blocks or jack stands and take all 4 wheels off, remove the calipers, then pop the rotors loose and run them up to the local...
Just doing the injectors and walbro 255 lph pump this Saturday. I plan on starting around 10 am or so. Anyone that has any experience or just...
I think it also has all the stuff for the heads in it too? Cam seals maybe and that sort of thing. You could always message...I think it is...
Donno, but if you look at the thread about the hybrid on a budget, the part listed that he bought was the EJ20 rebuild I believe. He even lists...
Haha, that is the main part..you can't be afraid to break something. If you get that out of your head, then it's not too bad. And, I have found...
Dang, I seem to remember people using the EJ20 rebuild kit and then getting the STI head gaskets. But that is just what I remember....the EJ20...
Just wanted to say congrats on digging in and doing the work yourself. And a big thanks to WJM for helping you out with the information. That to...
Stock is best, followed by a cold air (down low intake as you call it) intake. If you are going to buy one, go with one that keeps the stock...
About to head that way. Hoping you will still be working :) I'll bring some beer for everyone of legal age.
There are heat resistant lines you can get to go over them or around them. Just go to summitracing.com or whatever their site is and they have...
Lol, problem identified! Easy fix!!
Seems like a better method may just be to reinforce the existing pickup rather than replacing anything. I would be curious to see exactly where...
Or if you went to someplace that did not know, they did not use a crush washer...I tried going without one...got leaks.
I have seen that thread before...lots of very good information!
Any mods to this car or is it a stock 2.5 rs?