Separate names with a comma.
Wow, I don't want to step on their thread, but maybe next time they can come to TS - we do AWD cars for $40 and 2wd cars for $35 on dyno days......
We have one of the cool nylon-rollered, articulating, rollers that bolts to the hub... We also have a "Shawn" that can hand-hammer as wide as you...
For drag racing, nothing... it's just going straight... maybe bushings to help with deflection on the launch... For road racing - EVERYTHING and...
Sounds good. Siegel
I have to admit that I think you made the right decision. RA is not a good first track. Even the great SLOWWRX waited until he'd run his car...
Joey was in here just the other day. I believe he said that was one of his first time's ever on track and it was his first time at RA. That...
The Beauty of Data Acq. Cliff Notes: Data Acq is amazing for showing where you are leaving lap-time on the table. Traqmate is easy to use....
Yep, the Cossie heads and cams. It outweighs Lucy by over 400 lbs, can't quite fit the rubber we run, and doesn't have quite the level of aero we...
That is the fastest Subaru I have ever been in on the street (I only drove Lucy on track)... 1st is useless at WOT, it spins all 4 at the top of...
We keep Q16 - mildly oxygenated 116 octane :D Siegel
I have to admit, this was the fastest tune I've EVER had.... A little polishing on the street and she was good to go. I had a map from a similar...
We've had a couple labonte kits here. They were all installed by the customers and possibly installed wrong, but most had issues... Siegel
He'll be there instructing ;) Siegel
We had one cancellation yesterday, so now there's one spot open ;) Open Track or Student. Siegel
We sell Subaru OEM sensors for $172 or something... Siegel
Generally you have to replace the front o2 sensor... Siegel
We've got them for $999 shipped ;) Siegel
250 is no problem, we can almost make that on a stock WRX turbo. 300whp requires at least a VF-39 and FMIC, and is more suggested for something...
Please realize that a VF-37 is *SMALLER* than a VF-39. It will spool great, but make less power than a normal old VF-39... I've tuned a few. Siegel
There are some higher quality cut-outs. As long as you put the cut-out in the right place it doesn't effect the tune much at all. It is a riot...