Separate names with a comma.
Everything is stock, though I haven't checked torque on them (they are tool tight)
Correct. I gave them a look the other day when I had the car on the lift and didn't see anything amiss other than slightly worn endlink bushings....
Thanks. The strut tops are good; I think they may have even been replaced in the past 10 years sometime. I guess it's down to the sway bushings...
Ok, I know the title was pretty general, but I'm having a hard time tracking down a noise in the legacys suspension. I get a clunking over...
Yeah, that's what I was thinking, but I have broken extractors on that same bolt on other cars by using too large a breaker bar. The one that...
On my 96 civic I broke off a lower shock mount bolt. They are known for seizing even under the best conditions, and these had seen a couple of...
Heck yeah take pictures!
Really diggin the wheels! Were there other color jewels where you got those stem caps?
It melted the hard line? Or is it a flexible line on the FXT?
That is sweet! Is that a Topspeed sequential shifter or is it made by another company?
1. Throw it in the fryer. 2. Add Turkey 3. ???? 4. YUM!
Also, for further cross referencing http://forums.nasioc.com/forums/showthread.php?t=1265631
Yeah the lines are compatible. The WRX brakes have 295mm front rotor diameter while your RS has a 276mm diameter rotor. If you aren't changing...
If you aren't on a paved surface you might :P
So is the Si drive programmable? It looks like there might be some pretty awesome possibilities with boost control to keep traction.
I used safety wire to just make stronger tabs. Wire across the broken area with the screws loose, then tighten screws. it almost works better...
It's a real shame you can't clear over sharpie very well!!
I'll keep that in mind about the oil pan. I guess mine needs to come off to check out that pickup since it already has a dent in the bottom of it!
oooohh yeah. I know the rear end is supposed to have a vlsd, but the label on the cover doesn't say LSD on it, just 3.90. Maybe I plan on doing...
Hey thanks guys! Breel, which part of Jonesboro are you in? I'm down in Lovejoy, right off Tara Blvd.