Separate names with a comma.
all the perrin site says is that they are both 22mm bars, it doesnt say much about the adjustment holes :confused:
see thats the problem, i dont really know what each hole corresponds to as far as millimeters go. on the installation instructions it just...
Ok so i read the sway/strut bar thread as well as the link to what porter was saying about set up of sway bars and so on. Anyway i have perrin...
nah i dont have a way to check, but the drop in underhood temps should be immediately noticable after wrapping it and driving it for a little...
I just bought a roll of Design Engineering header wrap. Its 2" wide and 50' long. it was like 40 bucks after tax. If you want i can use what i...
how much would it be?? and would it be enough for us both??? I wanna wrap my up and down pipes if i do it. cause if im gonna wrap one of them...
Yeah it spools so nicely!! Id like to heat wrap the up and down pipe just to keep underhood temps down a little bit (underhood temps seem to have...
Yeah i went to napa ahead of time and got a bolt to fill the bung. It was a 12mm bolt but i cant remember the pitch. Man i didnt know the mod...
Hey i put the pipe in this afternoon! i love it! the whole install took 2 and a half hours. I was able to leave the o2 sensor in and just work...
Awesome! thanks for the help guys! i just went and picked up a TurboXS Up pipe with the flex section for $225 including gaskets, i also picked...
Yeah that would be cool, i just dont want to wrap it unless its absolutely necessary. So im not sure if i will wrap mine or not. Did you guys...
word! do you know anywhere to get it for less than $275??? im also considering the perrin up pipe, tho it does not have the flex section.
I may order an uppipe this afternoon, any suggestions?? I was considering the helix UP with the flex section or anything else in the ballpark of...
yeah it was pretty easy, next is the up pipe whice i hear is kinda difficult! :(
i gotcha, thanks for the input all!!! has anyone had any trouble with the cel fix??? is there any downsides to using a cel fix???
also in that second picture, is that bung for a wideband o2 or what???
First picture... [IMG] Massive 4 inch bellmouth... [IMG] 3 inch pipe all the way back! [IMG]
Just installed my helix catless downpipe!!! I love it, i can feel some pretty noticable gains as well as a much smoother torque curve. The sound...
ok cool, thanks for all the help, one other possibility is that it was a "mustang dynamometer". is it possible that that particular brand just...
the CAI is the new version, the 65 mm red intake. its the one that has the same diameter MAF as the factory intake. i was just assuming...