Cobb Software

Discussion in 'Modifications & DIY how-to' started by clemsonscooby, Feb 6, 2007.

  1. clemsonscooby

    clemsonscooby Active Member

    Joined:
    Dec 13, 2005
    Messages:
    1,536
    Likes Received:
    0
    Does anyone know where the Cobb software is? As in an electronic form of the software cd that would come with the AP... I have checked on Cobbtuning.com, but I am just not finding it.
     
  2. pleiades

    pleiades Member

    Joined:
    Dec 1, 2006
    Messages:
    94
    Likes Received:
    0
    here is the link to the new 2.0 software/firmware http://www.cobbtuning.com/info/?id=3199
     
  3. Intrigue2727

    Intrigue2727 Member

    Joined:
    Apr 13, 2006
    Messages:
    343
    Likes Received:
    0
    How New Is It? Cause I Just Bought Mine In The Beginning Of Jan.
     
  4. clemsonscooby

    clemsonscooby Active Member

    Joined:
    Dec 13, 2005
    Messages:
    1,536
    Likes Received:
    0
    Not that new, its AP1. The problem now is that the cable I bought for it, a 9-pin to USB isn't recognizing the device. So I can't load any new maps onto the AP.
     
  5. andy251203

    andy251203 Member

    Joined:
    Mar 6, 2006
    Messages:
    159
    Likes Received:
    0
    I believe that the version 1's only work for a 9 pin to 9 pin serial connection. At least that's what mine came with.
     
  6. clemsonscooby

    clemsonscooby Active Member

    Joined:
    Dec 13, 2005
    Messages:
    1,536
    Likes Received:
    0
    Yeah, I think the software is not compatible with a usb connection, unless someone can tell me otherwise. I will see if anyone is nice enough to bring their laptop and cable so I can load a stage2 93octane map to the dyno day this Saturday.
     
  7. RADON

    RADON Member

    Joined:
    Jan 26, 2004
    Messages:
    424
    Likes Received:
    0
    I used a usb to serial connector when I had my original AP1. You'll most likely need to install a windows drivers for that connector, I did.
     
  8. clemsonscooby

    clemsonscooby Active Member

    Joined:
    Dec 13, 2005
    Messages:
    1,536
    Likes Received:
    0
    I installed the driver from radioshack since that is where I bought the cable from, but it is still not working. Its saying that its not in sync with the device when I try to connect to the AP.
     

Share This Page