Defi egt going haywire...

Discussion in 'Modifications & DIY how-to' started by WRboXer, Mar 10, 2011.

  1. WRboXer

    WRboXer Active Member

    Joined:
    Jul 23, 2004
    Messages:
    584
    Likes Received:
    0
    My defi egt recently has been acting up on me. Sometimes it reads normal, then it will slowly sweep and then peg the gauge, then will all together go to zero and will not respond to the control unit inputs. What do I need to fix/replace?
     
    #1 WRboXer, Mar 10, 2011
  2. integroid

    integroid
    Supporting Member

    Joined:
    Dec 28, 2004
    Messages:
    3,084
    Likes Received:
    0
    Sounds like amybe the sensor. You could probably check it with a multimeter. Have you tried to contact Defi support?
     
    #2 integroid, Mar 10, 2011
  3. Alex

    Alex Community Founder
    Staff Member

    Joined:
    Oct 7, 2003
    Messages:
    15,892
    Likes Received:
    20
    Its either the sensor or a grounding issue I would think.
     
    #3 Alex, Mar 10, 2011
  4. pEd

    pEd This ain't no Piccadilly!

    Joined:
    Mar 5, 2004
    Messages:
    2,460
    Likes Received:
    3
    Yeah,

    Grounding issue would be my first guess.
    Then I'd check the sensor.
     
    #4 pEd, Mar 10, 2011
  5. Cool_____

    Cool_____ Banned

    Joined:
    Sep 5, 2005
    Messages:
    7,338
    Likes Received:
    0
    your motor is about to explode. Danger to manifold!
     
    #5 Cool_____, Mar 10, 2011
  6. Alex

    Alex Community Founder
    Staff Member

    Joined:
    Oct 7, 2003
    Messages:
    15,892
    Likes Received:
    20
    The floor pan has got to fall out first ;)
     
    #6 Alex, Mar 10, 2011
  7. WRboXer

    WRboXer Active Member

    Joined:
    Jul 23, 2004
    Messages:
    584
    Likes Received:
    0
    Fuck the laptop... "slam"
     
    #7 WRboXer, Mar 10, 2011
  8. Cool_____

    Cool_____ Banned

    Joined:
    Sep 5, 2005
    Messages:
    7,338
    Likes Received:
    0
    In all honesty I see two issues.....ground bad or the sender is bad.
     
    #8 Cool_____, Mar 10, 2011
(You must log in or sign up to post here.)

Share This Page