Power question...

Discussion in 'Modifications & DIY how-to' started by Greg, Jul 31, 2007.

  1. Greg

    Greg Active Member

    Joined:
    Apr 16, 2006
    Messages:
    1,714
    Likes Received:
    0
    OK, I installed a TBE on an 06' sti today (untuned) and I have a few questions...
    The setup is:
    4" Turbo XS DP
    3" high flow cat
    3" cat back turbo xs
    2.75" Prodrive Axle back

    Heres the problem:
    when going to WOT it stutters really bad and is jittery. It feels like a combination of a slipping clutch and a boost leak. But the car has 17,000 miles on it, nothing appears to be leaking and you can't hear a leak... What could it be?
    I ran the same setup, minus the odd sized exhaust pieces, for a few months, and it NEVER felt like that...
    Could it be that theres so much air going into the dp, then it compresses to the cat/catback, then compresses even more into the axle back, and it just can't get it out fast enough?
     
  2. jonnyboy0150

    jonnyboy0150 Member

    Joined:
    Mar 2, 2005
    Messages:
    712
    Likes Received:
    0
    I would highly advise some form of tuning.
     
  3. 5spdfrk

    5spdfrk Active Member

    Joined:
    Jul 27, 2004
    Messages:
    1,007
    Likes Received:
    0
    Did you reset the ecu?
     
  4. 1naplay

    1naplay Member

    Joined:
    Jun 1, 2007
    Messages:
    261
    Likes Received:
    0
    yeah, was reset and is running better, but dont know if would do it again.
     
  5. schneid

    schneid Member

    Joined:
    Feb 2, 2006
    Messages:
    616
    Likes Received:
    0
    get an accessport NOW!

    (my opinion)
     
  6. bluelinescooby

    Joined:
    Feb 26, 2005
    Messages:
    400
    Likes Received:
    0
    +1 for AP

    Mine did something similar when I went from my TXS Stealthback to a full 3", then again when I went back to a 2.5" setup..... it went away after a few full throttle runs, and hasn't been an issue since.... I don't know if it just stumbles through the transition or what....
     
  7. 1naplay

    1naplay Member

    Joined:
    Jun 1, 2007
    Messages:
    261
    Likes Received:
    0
    thats my set up, I have the stealth turbo back and then the prodrive muffler. once I reseted my ecu, been running fine, so you said that the problem never came back or you changed it back t the old setup?
     
  8. miloman

    miloman Retired Admin

    Joined:
    Feb 3, 2004
    Messages:
    12,774
    Likes Received:
    1
    Same happened to me after I installed a bigger intercooler and TBE. Went away after an ECU reset.
     
  9. mmtasty

    mmtasty Active Member

    Joined:
    Apr 21, 2006
    Messages:
    1,441
    Likes Received:
    0
    does the boost creep? I heard that a large DP will cause boost creeping and, in turn, lean out the engine. AKA- not good. I'd run over to Battleground ASAP and before going WOT again to see what they say. You're going to want a tune anyway, may as well get it now.
     
  10. miloman

    miloman Retired Admin

    Joined:
    Feb 3, 2004
    Messages:
    12,774
    Likes Received:
    1
    I'll be surprised if it's creeping in the warm summer weather. I have mostly known people who have had creep issues in the winter. Very rarely have I heard of issues in the summer.
     
  11. 1naplay

    1naplay Member

    Joined:
    Jun 1, 2007
    Messages:
    261
    Likes Received:
    0
    would I still get boost creep even if I have a high flow cat?
     
  12. keeganxt

    keeganxt Active Member

    Joined:
    Nov 13, 2006
    Messages:
    1,071
    Likes Received:
    0
    you shouldn't be getting creep...just get a tune...it'll be smoother than stock during acceleration and you'll make more power and it's just super good like and stuff
     
  13. miloman

    miloman Retired Admin

    Joined:
    Feb 3, 2004
    Messages:
    12,774
    Likes Received:
    1
    Yes you could.
     
  14. Greg

    Greg Active Member

    Joined:
    Apr 16, 2006
    Messages:
    1,714
    Likes Received:
    0
    You can get creep with the cat, but it reduces it A LOT. When I first made my exhaust, I didn't know about the creep issues til after the fact, so I went back and put a tuboxs HFcat on, and I only hit creep one time and that was in the winter in the mountains...
     
  15. wrxguy

    wrxguy Member

    Joined:
    Nov 3, 2005
    Messages:
    467
    Likes Received:
    0
    Everyone see's boost creep every once in a while. During the winter time i see it the most. Just get your whip tuned and then have a check up every 3-6 months.
     
  16. Jake

    Jake Active Member

    Joined:
    Jul 8, 2006
    Messages:
    3,845
    Likes Received:
    0
    I agree, get it tuned.

    /issues
    /thread
     
  17. Greg

    Greg Active Member

    Joined:
    Apr 16, 2006
    Messages:
    1,714
    Likes Received:
    0
    You do know that he just spent over $2000 on parts... Just up and spending another grand isn't exactly an easy thing to do....
    I'm trying to make his current setup a safe as it can possibly be without a tune, til he gets the money. Not that hard of a concept...
     
  18. 1naplay

    1naplay Member

    Joined:
    Jun 1, 2007
    Messages:
    261
    Likes Received:
    0
    yeah just spend a lot of money and trying to figure out a way to make it work :(
     
  19. miloman

    miloman Retired Admin

    Joined:
    Feb 3, 2004
    Messages:
    12,774
    Likes Received:
    1
    Did the reset work?
     
  20. Greg

    Greg Active Member

    Joined:
    Apr 16, 2006
    Messages:
    1,714
    Likes Received:
    0
    Well, hes sayig that hes been feeling this since he bought the car now.... But he did say that the reset helped it somewhat
     
  21. siegelracing

    siegelracing Registered Vendor<br><b><font color="#666666">bion

    Joined:
    Aug 19, 2004
    Messages:
    1,553
    Likes Received:
    0
    ecuEdit for the cheap people
     
  22. Greg

    Greg Active Member

    Joined:
    Apr 16, 2006
    Messages:
    1,714
    Likes Received:
    0
    Hey Scott, how late will you be there Saturday? He has to work...
     

Share This Page