who does fender rolling?

We can! You will pay an arm and a leg to have it done professionally. How much extra space do you need? There is a forester on here that fit some really wide wheels previously. I only needed like half an inch to fit the rears, so I just cut the inside lip with a angle grinder. It looks good, can't see that I did it, unless you stick your head under the wheel well. Took about an hour and used some touch up paint that matched to seal everything.

 

Go buy a baseball bat.

 

This is the perfect answer. To all problems. :rofl:

 

I believe someone on the boards rented a fender roller. May want to check that out.

 

Just remember that when it's cold outside, the paint is more brittle and will crack....ask me how I know this.

 

I took my Mazda to Butler Tire and Wheel last year and they did a good job on it.

They used a heat gun and a roller took them about 45 min to do the rear.

They charged 45 a side.

 

Ive got one! I did the front fenders on my 5.0 mustang. It's an eastwood fender roller, dont know if it will fit the 5x100 but let me know if i can help you out.

-Jon

 

I posted this before. You may be interested. You can rent a tool for 5 days.

http://www.rollyourfender.com/

Andy

 

Mine looks just like that but its made by Eastwood. That one looks like maybe a knock or they just peeled the sticker off. Mines got multiple holes in the mounting surface and i held it up to a 5x100 wrx and looks like it will fit. Here's a link of the website i bought mine off of :

http://www.eastwoodco.com/jump.jsp?itemID=6159&itemType=PRODUCT&path=1%2C2%2C503%2C504%2C514&KickerID=232&KICKER

Heres a few bad pics of me rolling the fenders on my mustang:

 

If you can get it locally, support the locals.

 

Took a couple more pics of my fender roller...

 

Scott Siegel at SOG told me he can do it for me. Might want to call up there.

 

and when does he have the time???

 

he's got a wooden bat, heh.

 

We have one.

 

I don't know if you got my PM but are you willing to loan/rent your fender roller to me? Also, do you have a heat gun? I'd really like to do this soon. My +48et BBS wheels with Bridgestone S03 are rubbing like nuts in hard corners. I pulled the rubber trim pieces off of the rear fender lips and both of them were worn through to the metal.

 

I know the feelin, hey batlground how much ya charging for the rears?

 

You wanna throw in on a fender rolling kit from "rollyourownfenders.com" or whatever? $50+$250deposit.

 

Momentem has one tryin to wait on his reply. We could just mak a day/evening of it and chip in for food n drinks. but if not sure i'll chip in cause I need to do it soon.