Thanks again guys for helping me with the coil over install! They are awesome, and I still haven't even had the car aligned yet :rofl: So, thanks Jack, Alex, and Brett....especially Jack for getting these off his car and selling them to me! :bowdown:
bring it here. That way you can help on the house. w/out special stuff...you should get this: -2.5 front camber +0.01 front toe -1.4~-1.6 rear camber (not adjustable, should be in that range) +0.01 rear toe +3.0 caster (not adjustable, should be near that number by +/-0.5)
Glad you're enjoying them mate. It was quite unusual to do an install and use the correct tools for things. Will, would he have more caster seen as we did it so the plates were set for caster?
Yep. You could get as much as +9 with other supporting mods. However, Matt only needs about +5.5 or so.
100 dollars for an alignment set to my specs with me sitting in the car. Which is what I priced out from most other places as well. But I trust these guys more than some other shops.
When we did the alignment, i sat in the car and stepped out and it made no difference because the springs were so stiff.
with coilover cars it not that big of a deal. On cars with really soft springs, like STOCK cars...its an issue.