I'm looking for the best place(s) to purchase and have a SS 3" flex joint installed on my DP here in Atlanta. I'm not a 100% in love with the fitment of my turboback so some modification is in order. I'm at work and on my phone so sorry if this is already covered in a previous thread. Thanks in advance, Ivan
I know a good spot in Norcross. They made my straight pipe when I had it and never had any issues with it. Not sure if they have the flex joints fs though. Extreme Performance Mufflers 6309 Jimmy Carter Boulevard Norcross, GA 30071-2316 (770) 817-1150 aneeL
Back before Alex sold me his exhaust he got Juston at Six Star to weld a 3" flex pipe in place of the 2.5" taper on his Cobb CBE. Quality work, too. If you mention either me (Diffenderfer) or Alex, Juston will know what you're talking about. 404-377-7874 www.sixstarsvc.com
We would be happy to do it as well, we have a couple of people here that are capable of doing it. We only use the Tig as well so it won't look like those awful Mig welds normal muffler shops do. Matt TopSpeed Motorsports
Thx for the replies! At this point i would gladly go to whoever has the 3" flex in stock. I want this taken care of rush since as it sits, its leaking a bit on the DP and MP flanges. Buyers beware, a CNT DP and GMS do NOT like each other fitment wise! I'm about to throw everything away and buy a greddy or hks turboback like i originally planned. Lol Thanks, Ivan
Let me know if you come out to the Haynes bridge area during the weekday so I can pickup that elbow for the intake please...
If you want a nice 3 inch stainless flex I doubt anyone has one in stock. Most people stock the mild steel ones. Matt
ended up going to six star. one of the best experiences i've had in a while. between allpro and six star, atl is a great place to be a suby owner