Where to Clean Block and Heads?

Discussion in 'Modifications & DIY how-to' started by Max Q, Jun 10, 2012.

  1. Max Q

    Max Q Member

    In the Marietta area. Just need the block and heads cleaned and possibly a resurfacing of the heads as well. Any recommendations?

    Also, what's the typical cost and turnaround of a cleaning/resurfacing?
     
  2. Max Q

    Max Q Member

    Also, who wants to recommend me a breaker bar that doesn't "give" when attempting to break loose cam sprocket bolts?
     
  3. b reel

    b reel Active Member

    get a MAPP gas torch from HD (that would be the Yellow tank), a 1/2" impact, 1/2" drive 10mm Allen socket and a hammer.
     
  4. lucky13

    lucky13 Member

    And check with cylinder head exchange on fairground st. Just north of the south loop. Had good experiences with them.
     
  5. ballistic

    ballistic Member

    as far as I know cylinder head exchange doesnt do machine work, they just stock heads done by Allied or Dover, cant remember which one.
     
  6. lucky13

    lucky13 Member

  7. CelticPride

    CelticPride Banned

    Use the guys that does slowwrx's engine. They are always clean enough to eat off of.
     

Share This Page