Separator Plate Replacement

Discussion in 'Modifications & DIY how-to' started by BKiller, Feb 6, 2013.

  1. BKiller

    BKiller Active Member

    Well it looks like the oil separator plate just puked on my drive to work today. 98 Outback with 205k on it.
    Is All-Pro my best choice for repair? Anyone near the south side of ATL?
     
    BKiller, Feb 6, 2013
    #1
  2. RSConvert

    RSConvert ɹǝuɹnʇpɐǝɥ uʞnɟɐɥnɯ ɐ sʇı Supporting Member

    Best? I guess that's really based on someone's opinion, so my answer is totally bias. ;)

    We would be happy to do it, if you're willing to take a drive up. You most likely still have a plastic one so we would replace it with an updated metal one.

     
    RSConvert, Feb 6, 2013
    #2
  3. slowwrx

    slowwrx Supporting Member

    Could be a rear main seal as well. The signs are pretty similar, replacement is about the same.
     
    slowwrx, Feb 6, 2013
    #3
  4. blaster

    blaster my other ride is your mom Supporting Member

    Depending on where you are Six Star in Decatur might be a good option, too.
     
    blaster, Feb 6, 2013
    #4
  5. BKiller

    BKiller Active Member

    I'm down in McDonough so everything seems to be at least 1 hour away.
     
    BKiller, Feb 6, 2013
    #5
  6. b reel

    b reel Active Member

    Not to knock Allpro but Six Star is a damn good alternative for someone just as good without the drive for us southside guys.
     
    b reel, Feb 6, 2013
    #6

Share This Page