531hp Stock Block w/ Pumpgas+Meth

Discussion in 'TopSpeed' started by Doug@DBW Motorsports, Dec 15, 2005.

  1. Doug@DBW Motorsports

    Doug@DBW Motorsports Active Member

    This car made 531hp @ 27psi with pumpgas and meth injection. It could have made more if I turned the boost up but the customer wanted to stop there being he was still on stock block.

    Mods: Invidia Catback, 816cc injectors, Ecutek w/ Utec, GT-35r, Tial BOV, walboro fuel pump, TopSpeed Meth Kit, Perrin FMIC, Exedy twin plate clutch.

    The car is a 2004 STI that still has factory heads, with the TGV's still intact and untouched. I was really impressed by the way we were able to get the car to spool. By using the ecutek to control the AVCS I was able to get the car to spool 400rpms quicker, and drive and idle like stock. Also the maf was moved to the charge pipe instead of infront of the turbo.

    This car was built by us and Tuned by us.. [​IMG]
     
  2. miloman

    miloman Retired Admin

    doug... u never cease to amaze me :bigthumb:
     
  3. 1ll-WRX

    1ll-WRX Active Member

    wow...nice #'s
     
  4. Doug@DBW Motorsports

    Doug@DBW Motorsports Active Member

  5. knhtrdr

    knhtrdr Active Member

    HOLY...:eek:hnoes: :bowdown:
     
  6. Alex

    Alex Community Founder Staff Member

    Well done boys :bigthumb:
     
  7. wrxin8or

    wrxin8or Mullitt Staff Member

    he got up to 130 that quick???

    wow that thing must be nuts
     
  8. rolling_trip

    rolling_trip Active Member

    the video wasn't long enough...........wait a minute thats a good thing! Nice job guys.
     
  9. miloman

    miloman Retired Admin

    u should include a neck brace with the gt35r packages ;)
     
  10. SwampLandRex

    SwampLandRex Member

    what is the advantage to moving the maf to the charge pipe?
     

Share This Page