Polyurethane is a polymer/plastic (sorry I haven't memorized the formula for urethane), that behaves a lot like a rubber.... mainly it flexes well...
I've seen the pic, but the light and the quick scurry to actually see it go by, I couldn't identify it and I forgot what Porter looks like. his...
Saw an SVX on Northside Dr today about 6pm. Beautiful blue color. Was it you porter? Sorry, I didn't wave because I was trying to reset...
Ditto that Milo. Upgrade that 2.5na to the EJ20! then rock that civic's socks! :wiggle:
if you need sockets and stuff, mine go up to 27mm and i've got a wrench that'll do 145ftlb. just let me know if you need them
The purpose of the glass fiber is to carry the load instead of putting it through the epoxy (which is very weak), but it only works when the load...
fiber glass is made by taking glass fibers (think splinter sized pieces of glass) and embedding them in epoxy (polymer/plastic). it's essentially...
i know it's specced torque is 145 ft-lbs after some mild searching, but i can't find a desciption of the part. The rear wheel might turn when...
that bolt to the left of the one shown on the nasioc post (the small 8mm one). shouldn't matter because the large one they use is attached to the...
haha, that look about right will? :ddirty: thanks JT that's perfect!
Scoobysport's rear wing is sexy as shown above. Here's the RB-5 that would be on my car if i owned a sedan:...
oh, the collar that normally goes on the terminal for the voltage gauge was connected around the riser for the grounding kit.
1)Neg terminal => driver cylinder bank, body earth (same point as voltage gauge), driver strut tower, passenger cylinder bank , alternator...
Can I get someone to help me install my grounding kit? I started to do it this afternoon, got everything hooked in and went to turn it on.........
just to put this in perspective. That's 1 turn every 183.6 feet for 11 miles!!! Or for you football people, 2 turns from endzone to endzone......
started late last night. I don't know what the problem was but everything seems fine now.
Now that's one race i would like to see :wiggle:
JT, can you photoshop a pic of amol with a blond wig in a red legacy and post it here?? Then Will can go ahead and compare it for reference...
I've gotta crawl under there today anyway to tighten some bolts, so I'll give the 2x4 a shot. hopefully it won't slide.
Thanks for the suggestion. I found lots of them, can't find the rise in the end though?
Separate names with a comma.