This is not a for sale ad but a feeler so mods/admins if you feel this doesn't go with the rules then please delete this. With my new invention for the intake box, we @ Radicals Motorsports would like to use my model and smooth it out and make a mold to make these boxes in quantities. We will do them in either CF or fiberglass painted to a color of your choice. We are experienced in using both. Prices are not decided and will not be posted until we can satisfy rules but I will say they will be in the $200 - $400 range most likely. We will do mine first so I will be the guinea pig. I would like a tally of who would most 'DEFINATELY' be interested in purchasing this. Let me know as if the interest isn't out there then no point in making a mold and I'll just do my box for myself. :wiggle: This isn't a bling item only. My box now works better than the factory airbox and I have all the data logs to prove it. The temps very rarely go 8 degrees over outside temps while cruising. The factory airbox goes 10-12 degress over. Those with FMIC and short rams are most likely sitting at close to 120 degrees and any reasonably tuned car will pull timing and boost at 122 degrees. With the box you are pretty much guaranteed to always be at your max power potential unless you have some other issue going on :keke:.
We haven't made the first one yet. I'll get some shots of my mock up that is working so great in a few.
Here are the pics. First the foglight intake... Then the box itself with the snorkel also feeding air Keep in mind that this was the first mock up just to see if the theory works and it indeed did. We are gonna clean it all up soon and make one out of CF with straightened edges and smooth curves and dips. Hopefully it'll be done by Nopi for those of you there to see in person.
getting a feeler is fine... however if you decide to go ahead and sell these on WRXatlanta, redical motorsports will need to become an official vendor... on topic: this thing looks like it will work pretty well