Rear toe problems

Discussion in 'Modifications & DIY how-to' started by John, Apr 29, 2011.

  1. John

    John Active Member

    Hey guys,

    I aligned my car today, and I'm having some problems with the rear toe.

    Basically, I'm -.12 on the left, and +.12 on the right. Both factory adjustment cams are maxed out. I tried pushing/pulling on the wheel....blah blah blah blah....checking the alignment machines targets.....I've eliminated all options, besides I need something to adjust the toe further.

    Is there any available aftermarket lateral links that have a jam nut style adjustment instead of cams? Something like what the Toyota Avalons have, like pictured below

    Thanks

    [​IMG]
     
  2. b reel

    b reel Active Member

    whiteline adjustable lateral links
     
  3. John

    John Active Member

    Thanks "bob".

    So anyways. the inboard mounting bolt (the one wiht the cams), the hole for it is elongated to allow for that bolt to move around right? how to I keep that from happening with the new lateral links? Can I completely lock out the factory adjustment, or will the lateral links give me factory adjustment plus some. I hate cams, they get knocked out of alignment too easy. I would rather just get rid of them all the way
     
    Last edited: Apr 29, 2011
  4. John

    John Active Member

  5. b reel

    b reel Active Member

  6. John

    John Active Member

    No real names. Remember? haha

    I found the lock bolts. Will WRX lateral links fit my car?

    EDIT - wrx lat links will fit
     
    Last edited: Apr 30, 2011
  7. Sparta

    Sparta Active Member

    he addressed you by your screen name?
     
  8. John

    John Active Member

    yes. it was a joke. something from the chat a few days ago
     
  9. b reel

    b reel Active Member

    is it me or does that link look warped?
     
  10. John

    John Active Member

    The one in the OP? It does now that you mention it. On the inner side of it.
     
  11. b reel

    b reel Active Member

    time to go to pull-a-part or Allpro. or find somebody with a set of
    STI's
     
  12. John

    John Active Member

    I'm going to be up at Allpro tomorrow anyways. I'll check to see what they have in stock.
     

Share This Page