what the is this for?

Discussion in 'Modifications & DIY how-to' started by awdlaunch132, Aug 28, 2007.

  1. awdlaunch132

    awdlaunch132 Member

  2. FACE

    FACE Active Member

    ???? I'm intrested as well...
     
  3. cannarella

    cannarella Member

    Trace the electrics down. Where is is hooked in the bay? To the regular vacuum or on the turbo hoses?
     
  4. blindfold

    blindfold Active Member

    it could be used as a switch for a sprayer for a front mount intercooler, when pressure exceeds a pre-set value, water starts to spray over the intercooler
     
  5. awdlaunch132

    awdlaunch132 Member

    running to my car right now
     
    Last edited: Aug 28, 2007
  6. cannarella

    cannarella Member

    Just show up to an install day and have some people look it over or take lots of pics and post them up for review.
     
  7. Alex

    Alex Community Founder Staff Member

    Im guessing its for the IC spray as well
     
  8. miloman

    miloman Retired Admin

    Switch for nitrous maybe? Unlikely, but when combined with the TPS...
     
  9. awdlaunch132

    awdlaunch132 Member

    the wires go to the auto intercooler sprayer. the vacumn hose goes to the bov.
     
  10. awdlaunch132

    awdlaunch132 Member

    so the car had a frontmount... or could is just be for the stock topmount. I looked over the front bumper really close everything looked uncut and not touched really.
     
  11. miloman

    miloman Retired Admin

    Could be for the top mount as well.
     

Share This Page