Just wanted to share with you guys a car that we had the privilege of installing some parts on last week, and tuning for a great customer. The particular customer drove from IL to Atlanta to have us work on his car. We installed a Dom1.5 and supporting mods with a Tomei equal length header and strapped it on the dyno for Doug to work his magic. The results were very impressive. The car was tuned on E85 at 23psi of boost. The car still has the stock bottom end, so we decided to call it good not pushing it any harder. The results are below. We here at TopSpeed are still CRAZY impressed with the response and power of this turbo. It still gets our stamp for the ultimate stock location setup! I'm sure the customer will jump in and let you know how it felt on the street. As always questions are welcome! Thanks guys. Numbers Dyno: DynoJet Tuner: Doug@TopSpeed Wheel HP: 443 Wheel TQ: 450 Ambient Temp: 70 Degrees Elevation: 1000ft Car Info Year: 2008 Engine Management: Cobb Turbo: Blouch Dom1.5 Intercooler: Process West Meth Kit: NO Injectors: ID1000 Intake/Inlet: Perrin Headers: Tomei Equal Length Uppipe: Tomei Downpipe: Invidia CBE: Invidia Other Power Mods: