Prodrive oval tip if you can find one Never mind just noticed 2013.
that clean battery needs a tie-down before a track day or autoX
OEM flanged nut will be M10x1.25 which uses a 14mm wrench, most garden variety aftermarket sourced nuts will use a 17mm wrench. If missing the...
Porsche Adriatic Blue... which everyone else has copied
You'll need a higher output alternator when running all the lights and turn them off when idling.
bad move to clear codes before getting with Allpro. Hope it's just a fluke but best to be on the safe side and let it sit till you get with them
the dreaded air injection crap. Did they delete the air pump?
Confused, is this car at Allpro or TSM?
Not knocking the choice but why the 80's Marchal throwback size? Check the body for heat distortion, if none just keep an eye on it for a while,...
Relax i missed the bulb comment I've always run 10ga with high wattage lights especially with multiples bundled from the batteries Are these...
it's stainless steel besides 5 seconds with a marker or the hassle of paint?
black Sharpie will fix those shiny SS parts
10ga wire soldered crimps heat-shrink off-road connectors never had any luck with clone relays touch the bulb with bare hands? bad idea
Call local tow yards for your van but don't expect to find anything of value if you find your van. Tow company employees will take what the...
Closed-deck is just added security, strength and stability at TDC. You'll still make the bore look like a barrel () with detonation under high...
I have a early Phase I type-RA case going to the machine shop tomorrow for the rear main thrust mod so I can run my Phase II rotating assembly....
22B is 96.9mm bore by 75mm stroke, same as the 91-94 USDM Legacy turbo case. Had Arai forged pistons@ 8.1:1 compression, STI V4 heads with sodium...
Closed deck does nothing for the hammering of bearings and the bursting of ringlands
For those of us who are more interested in performance above stance, too low ruins the experience... for me it just looks stupid.
I've taken a cut-off wheel to them before when they refused to budge on the press... the key part is the press.
Separate names with a comma.