Ingalls do fit the smaller rear strut holes. That is what I am running all around right now. No slippage.
I don't know what you mean. There is only 1 camber bolt per strut. Just put the aftermarket bolt in the top hole of the strut to brake knuckle...
If there is condensation in there then you messed up the clearing. Re bake and seal again. Opening the light again to add desiccant is only...
I have used the Ingalls for a while now. They will hold an alignment well, just make sure they are really tight and the orientation of the...
Yeah, there is a DIY about "clearing" headlights. I would suggest letting someone that knows how to do this bake yours at the next install meet....
You should download the user manual from the Cobb website. It has all the instructions and screens from each step.
Try the Sweet Water Blue for a sweet beer. I am a big Hefe Weissbier fan. I enjoy an unfiltered Belgian style. Magic Hat #9 is awesome. When I...
Figure anything out?
If its only happening when you are releasing the clutch, its possible that the throwout bearing is messed up or the clutch fork. If you remove...
Sounds like you may have broke an engine mount. The fact that it vibrates all the time, clutch in or out, means it may not be something...
Rad? I would rate that as probably the ugliest thing on the road. I think you are safe sticking with your Subaru. To each their own I guess.
I wouldn't mind have some CCW's that looked like that, but that is because CCW's are badass.
Nah, mine is an 03 and that is what the suggested. Although I installed some rear camber bolts to get rid of some of that. The car has a lot of...
I know the sedan is -1.3, but I dialed a little of that out.
I am not getting that one. Can you explain? All alignment is in the suspension components not in the wheels. I am sure if you add wider wheels,...
The reason I said it was too much is because for a few extra bucks Siegel will corner balance the car. It doesn't seem like an alignment and...
No, only when you remove suspension components, mainly the brake knuckle to strut bolts that control camber do you need to get another alignment....
-1.1 is from the stock camber bolts. I was easily able to get -2.5 or more with the Ingalls camber bolts. FYI, in case you want to save a few...
+1 for PDE. I have also noticed, that its not always about going more negative on camber for our cars, but increasing dynamic camber. Getting a...
You can get the AGX's for 350 on ebay. Struts are definitely supposed to help dampen out the bounce, but AGX's are pretty much the same as STi...
Separate names with a comma.