I'm just ribbin ya Brian. Make sure you check out my new wheels at SoG tonight.
This is the CRX that you bought for like $43.... and your going to spend $70 powder coating stuff on it???? IBspraypaintracersarefAstAr ;)
lol. You are brave driving those around, I dig them though. Makes me feel much better about runing different colors F/R
um, the 710s don't quite have the tread of the 070 ;)
I might try to head out....
nice! "felt kind of heavy" could be the taller gearing... I didn't notice it until we pulled the 275s off and ran a 245/40 which is almost an...
:confused: Glad no one was hurt. If its for track use then get a C5 or an STi.
ditto, with all the meth, race gas, and the fact that "I" do alot of the work on my car I need to invest. lol
I have wrapped a number of DPs and on mine I ended up painting the wrap with some 2000 deg paint to act as a sealer. Note that with wrapped...
FYI: My stock turbo would creep sometimes in 5th and always in 6th when the temps dropped below ~45 (car was in track trim so it was a little...
Yeah the car was more or less 'thrown together' before that autoX / picture; also, I had never driven on slicks before that event. It was still...
Nice work and good to meet you!
Brian: smaller rear bar maybe? Yeah, Hoppe said he liked the stiffined chassis... any other folks have experiance with a rear strut bar...
I have the 615s in 255 on the 9"'s right now... the 275 615s will also be another option for the 10".... I need to make friends with a C5 racer...
I would zero the toe F/R; max the front camber (sounds like you may not get much w/o bolts or plates) and then set the rear camber to something...
Who here noticed any improvements from the addition of strut bars. I have always dismissed them as "low (suspension) bang for the buck". But...
25psi on 91 oct: (note, I don't know what the CR is on the R4, could be lower but why go that far for pump only use? must be a Cali thang)...
Well, the first set will be some 255/40-17 ADVAN Neova's which is the largest size they make the 17" Neova in and it is actually the same as a...
lol, I just found the post that likely modivated this thread. That looks like a case of someone that isn't really familiar with...
I would 'interview' a couple of NTB/Hoffman/etc and find one that will let you decide the alighnment specs / work along side the tech. You could...
Separate names with a comma.