I got mine from GruppeS
i dumped the stocker and installed a perrin. Its pretty easy to install without removing the intake manifold. the only trick i've found for it is...
For the two 5 speed boxes i've had in the car I've never used it and had a need for it. The original 02 boxes were pretty weak and had crappy...
That transmission never had to be forced and never ever needed anything like that cocktail mix (which i dont personally like) to shift normally....
i mounted mine where the clock used to be. I got a factory pod and made a faceplate to fit the AVCR. As far as interfacing it with an ecu tune...
Had it, tuned it, took it off and threw it in a box. Also tried the perrin EBC, its sitting in the box next to the GM unit. I had it installed...
I have a sebion CF trunklid. There was about a 25-30 pound weight difference between the OEM and the CF one. You will need new torsion bars to...
I read about the cocktail back when i had my original 5 speed. Decided not to use it as I had some warranty left. When I upgraded to the RA...
the 6 speed has a magnet on the inside of the little oil pan on the bottom. If you really want to get any metal fragments out you will need to...
SoG will sell you as much or as little as you need as long as you bring your own container. The front diff, transmission gears and DCCD...
I'm using Extra S GL5 subaru fluid. Got it here in town from SoG. There's another factor in picking a fluid for your 6 speed if you have a...
With the RA gears first is indeed longer while the rest are spaced closer together. When you get on it you should notice much better acceleration....
Did you get it installed yet?
I've seen a few cheap ones as well. I chose to buy one that had been rebuilt rather than an as-is unit. In my case it was a good choice because my...
Finally I'm past the break in miles and can actually get on the gas. I thought the 5spd RA gears were close ratio but the JDM 6 speed box is...
As far as I'm aware the viscous units are 50:50 split. The 4kgf is the standard viscous center unit, same one thats used in the usdm wrx. I've...
I got it from http://www.redlinegoods.com/ They are overseas so it has not arrived yet. It was 46 bucks with shipping. FYI here's a link for...
I've got a new 6 speed boot on order. I went with a custom one made from alcantera with red stiching.
I went with an APS flywheel and Excedy stage 2 clutch (the 3 puck one). Mine was a v7 transmisison spec c transmission so i did not have to change...
I already had upgraded my 5 speed box to the RA gears. The RA gears are huge improvement over the regular 5 speed box. First gear is actually...
Separate names with a comma.