Maybe timing is off or coils plugged in backwards?
So, if the shit goes down....Do you think its better to be on your own, or to have a small group that all have the same plan? In the case of an...
The timing belt is "recommended" to be replaced at 105,000 miles or 7 years. A base model or DX will have crank windows, no power anything. LX...
Is it an EX or LX? Let me know if you need anything looked at, or if you need parts. I work up at HMOG in Buford and I have a decent collection...
looks to me like the smaller one is for the power steering and the larger maybe the coolant temp sensor in the cross-over pipe? seems weird that...
Anyone from Gwinnett planning to go? Meeting up in the am?
I'm going. I gotta see the beast in action:) What time ya'll heading up Mike?
Flat4-20 black ops & gt5
As long as you had the crank pulley in the correct position, I'd say you should be ok. I'm assuming you're concerned about bending valves?
I talked with the SOG techs and asked them what they used to clean off the heads when doing a HG job or whatever. 1 guy said he uses a little...
Not yet anyway...:sx:
I went over it lightly with a rubber bristle 3M disc...
Joke's on me I guess?...
All I was really after was a solid platform that can take any abuse I was gonna give it. I probably jumped the gun a little on getting the block...
I bought a NEW engine gasket kit for the 2nd assembly. I wouldn't say the smoke is "oily"...
not yet, all my tools are at the shop. tmrw...
Its plumbed exactly like this. The upper left vacuum port is open to atmosphere and the PCV valve is removed. [IMG]
Very similar if not identical to what I posted in that video before I found 2 broken pistons. You can see and smell a steady stream of...
This...also 1/4" 14mm swivel makes the engine mount nuts much easier.
That's what David told me... I asked him, cause you can see marks on them, but he said they were "normal" wear marks. I just got back from...
Separate names with a comma.