I use air tools on that sort of thing but the nut may not be as tight as you think. Use a box end wrench tto see if the end link is spinning w/...
I like steel lines b/c the brake feel at the limit is a definite improvement and you have better control, but that's up top you wether they're...
VERY common for the brakes to shimmy on the WRX. With 35k and no heavy autocrossing the rotors can be machined and your brake pads are likely...
I remove the radiator w/ the fans and it's WIDE OPEN. The last WRX t-belt took me 1 hour from start to finish except for the time to let it run...
I don't know how many teeth it takes to bend valves on a Subaru but you would notice a definite performance difference w/ a jumped belt that was...
There are 5 belt guides, one for each cam gear and one over the crank sprocket. The ones on the cam gears can be left alone but I recommend...
I wasn't thinking of how it works, just how I remembered it being. Memory is the first thing to go when you get old I guess.
Thank you goixiz. So I got the T and restrictor reversed. I'll retest it in the morning.
Just thought I would share this info with you guys. I had a customer w/an 02 WRX w/ misfire codes for each individual cylinder(po301-304) as well...
I am in the process of putting some stuff back to stock for this week ends mods. One thing is the stock boost solenoid and hoses. I've had the TXS...
Throw out bearing noise follows engine rpm not ground speed and usually changes or goes away with clutch pedal movement.
It's not just a Subaru thing. If you price parts from World Ford on Barrett Pkwy., and then call Cherokee Ford the price differences can be pretty...
Parts mark-ups , labor charges, and sometimes even included services in various mileage srevices can vary from shop to shop and even dealer to...
That is a Subaru TSB. A rubber hose on the passenger side under the intake will leak in cold temps and goes away when the engine warms the hose...
Corner of Shallowford and Sandy Plains at Tires Plus.
Are you in the Marietta area? If so I could check that out for you.
I've removed a couple of mechanical oil psi gauges before and they made HUGE messes under the dash. None of them were Autometer brand but I would...
I have a Bosal, looks the same as Stromung but without the cat.
I've read posts where mods included "modded injectors". I assume these are modified stockers, can anyone describe what has been done to them to...
The bearing cage will break and the axle will be like a stick in a cup.
Separate names with a comma.