This makes me LOL. So 99.5mm is stock bore. Most people will tolerate 99.75mm. I am aware that some builders won't do 100mm. But c'mon a whopping...
I've heard of degreeing cams but have no idea how to do it. I see your motor has 2.0 wrx heads does that mean you used adjustable cam gears. On...
the problem is setting the lash between the valves and cams in the car. Valves either need to be tipped if heads are off or different bucket...
ummmm tigwerks makes motor mounts.... lol just being a dick I'd leave the spt ones. I was just suggesting that if you had oem ones and ever had...
Cams will help. Are the necessary? No. I went with a 30r turbo that will make power to redline, but not much past it at the boost I will be at....
I bought some gsc s1's for mine... They are what I want. They make power up to 500hp and help low to mid range. After reading about long rod...
I just read your updated list. I'll give my opinion and experience. My motor had ringland failure at 16k mi. Wiseco drop ins were installed by...
I think KSTech has delete plates pretty cheap. If you are still rockin some tigwerks chub he has his listed on ebay. remove the pumps and hoses,...
I just bought head gaskets this time. the Gasket kit has a lot of stuff you won't need. All the seals between the block that Ball will already...
Lol you got that youtube video of that dude building the motor in his driveway on a blanket pulled up. Bookmarked that one too. Fuel pump looks...
My short block was not $2700 from Subaru, my whole built short block was $2700 from Outfront. I only mentioned this to him because before I...
How much is the work Ball is doing going to cost? My short block was $2700 shipped, refreshed cases, new 11+ crank, Manley Htuffs, and 100mm CP's...
Stage 3 is the vf39 and pinks otherwise I don't know why anyone would pay for pinks. My uncapped light blues were perfect for my vf39 setup.
Sounds like you are planning a 207 swap or a motor build the way you are driving it. I used a tune for a vf39 while I broke my motor in with a...
Is mahle making the slightly oversized stock pistons? like 99.55? I'd have run those to get the PWC correct and keep as much cyl liner as...
Home depot rent a hoss of a pick up for $20 for 70-90 min rent the uhaul first, then pick it up, get your car, and head home. Worked well for us...
Tigwerks is in Texas now
I just bought a tigwerks kit and have hashed through all the above kits mentioned. I will say there is only one more I'd add to the mix, a used...
My 6spd FW cost $50 to be resurfaced because its 2 step and I couldn't sell it for $125 shipped I know my ACT clutch has a SPEC sticker on the...
I'm doing the same thing as you. Except I bought a forged block... and got 40 mi out of it. I had a motor built at Outfront but they didn't clean...
Separate names with a comma.