I daily drive with only a 26mm bar in the rear with no problems ever.
Just start driving without trying to outmod everyone. The driver mod is the number one mod to take care of before anything else. Just go to the...
They aren't the stiffest springs if you are concerned about racing, but anything will be better than stock. You can easily use them on...
Is it a metal on metal thud, rattle, or a pop that you feel coming? That will sort of help with the description.
Russ and I are signed up to drive the WRX. Hopefully "stompy" doesn't rule the street prepared pax like last year.
When was the last time you bled your brakes? Are you hearing any squeeling? Are you getting a lot of vibrations in the brake pedal? At the bare...
You can get all the cables at radio shack. That is what I had to do, that way you have your own set to change maps whenever. They are just...
I've always tried to keep it between 34-36, but that is just my personal preference and slightly dependent on tires.
Having really high rear pressures makes the tire really stiff, which doesn't allow for any roll under load. So it makes it a little easier to...
When I used to autox on street tires I would run low 40's, but I would always drop them back down to about 35psi and my tires still wear evenly,...
It helps to see the pipe with the heatshielding off. http://www.raktron.com/wrx/images/uppipe36.jpg
I understand what you are saying. My point was just that when you are driving aggressively or racing on street tires its good to up the tire...
This is the first time I have seen this. Looks pretty cool. I am interested in the results as well. Pedal feel squeeshy? Your not slowing down...
Running at peak grip will destroy your tires much faster than running them about 5psi less.
How much does it weigh?
Over 40psi is a bit high. I used to use that when I was autox'ing on my street tires. I would suggest mid 30's and play around with it.
What? When I removed my uppipe from my 03 WRX there was no flex what so ever. Even if it was internal, i.e. behind the heatshielding, the heat...
Moron, that sucks that he acted that way especially when you were just trying to eat. The older generation doesn't understand anything about...
No, it shouldn't pop. The only noise a swaybar should make if installed properly is a squeek. That would be from the sway bar bushings rubbing...
When the brakes cool, they suck moisture and air from the outside this is why you should bleed them regularly. Probably everytime you rotate your...
Separate names with a comma.