So you never said what the offset of your wheel is. Find where ever your wheel came from and tell us the offset. The tire isn't the problem, as...
I always heard you can risk damaging the cylinder by going all the way to the floor. Its probably a combination of no fluid and going to the...
Rotors, pads, lines, then bleed. Bleed from front right (passenger side)- left rear-front left-rear right. Don't let brake fluid resevoir empty...
That was exactly what I was looking for.
Toe can cause pull, for example one wheel pointing straight while the other toe out. Your car will pull towards the toe out side. | / car pulls...
^^ that could work. I was looking for a metal block that looked like a big C to fit the pinch weld in that could be used with a rolling jack, but...
Oh definitely. 2 stands are great, 4 stands are even better. You don't have to get the largest stands possible, the 3ton stands are more than...
I just use the pinch welds with my rolling jack to change tires for racing and rotating. I've bent my pinch welds already, so I really don't care...
Its very possible to have toe out on one wheel and toe in on the other, which would angle the wheels in one direction. It would make you pull in...
Thats a good point, but the dampening is always set much higher when on the track. The soft street dampening should allow the strut to move a lot...
Ahh, forgot that you had the new 07... I agree with Milo, check the shims and make sure they are seated properly.
Yeah, your brakes need to be changed in the front soon. They start squeeling intermitantly, then it will become all the time. My rears are doing...
Definitely swaybar. Those Teins should last 30k before revalving unless you are tracking every month. Check out the bushings, they may need some...
How do you know its the coilovers? A lot of suspension noises are from swaybars. Is it a squeek, clunk, or rattle?
Make sure you change the trunk dampers, or you could use it as a catapalt.
Caster I don't believe is adjustable on our cars without a plate. Its hard to get the strut to rotate forwards or backwards when it is seated by...
Yeah, its supposed to be 4.8qt exactly. No sweat though, the extra .3qts not in the engine won't destroy anything. Our cars are always losing...
Any local parts store. I got my at advance auto parts. It is a flat plate threaded onto a long bolt. At one end of the bolt it has another flat...
Now you just need a brake spreader and a large socket to remove the rotor nut and you can do the entire install yourself. I outlined the rotor...
I agree with Ill. You need the ss lines (no modification necessary), DOT4 fluid (bleed entire system), slotted rotors (same size as stock), and...
Separate names with a comma.