option buy 4 new ones and install them clean all 4 and flow test it and fleabay it
would cleaning the FI work ? just an option
depends you will loose real time map only
I wont listen to anyone that says "burn the bridge" Everything is a full circle. You may have to lick the shoe that you use to kick someones a$$...
92x was part of the cause of demise :)
I personally use Gumout regane or Amsoil PI (nothing else) as an injector cleaner Once a year i do an injector clean and intake manifold clean
thats call the fur coat and it will cost extra
Powder coat or thermal coat ?
so what flow and latency to enter into the map ? for those that have used this injector
Ok ill share with you my trick to tap a hole square to the top face (if there is one) 1. insert a bolt into the tap only exposing the tip 2. press...
helicoil is the best option but you need to buy the kit if you are sure its 14mm then the next size up will be too large and may have hard time...
if you are in Gwinnett see this guy for emission Corner of Huff and Lawrenceville Hwy...
:keke:
so the cross members are removed from the roof ? i would at least place some dynamat or similar to prevent the tin noise
if anyone one wants a set of TGVs Top Feed, so you can port it - no downtime when you decide to swap let me know. I have a full manifold and TGVs...
does it involve bending ?
very noticeable difference [IMG]
How can you check if you have not enough and too much Freon
How do you know its good unless there is a bad to compare. we need SOG
key is consistency in testing for a comparable results yes real world is te true test but it will be all over the charts because there are just...
Separate names with a comma.