indeed, trust me the rear will hang out a lot more than you might expect! On stock cars that might only be about 100hp back there but it's very...
Well, not all of them are being repaired. Some will be scraped. Still I doubt BMW will sell a new M3 with a weakened frame so if something...
I've seen some lap times from previous events and it seems the STI seems to do better at that track than evo's.
yep, a true monster turbo there. and that engine is most likely going into some sort of ocean vessel and producing a few thousand HP/tq.
I did the jazzy board mod and love it! The cable comes up through the seat heater blank caps, just drimmeled a hole in one edge. It's a lot...
since you seem to have decent mileage on them the best idea is to replace all 4. I believe its 2/32ths of an inch difference is what subaru says...
The CLK is priced higher and more of a competitor to the BMW 6 series. Also that appears to be a black series..which is a LOT more expensive than...
you can do some tuning that might help some.
I was going to say what will did. If you keep the legacy 1-2 there will be no modifications needed, if you want more legacy gears then there will...
about -1.3 in rear, and around -.6 in front. considering I have some craptastic 205 coopers on 16" rims I'm not too worried. Just means it won't...
just street driving, reasonably aggressive I guess. It's already been done! Pretty happy with them so I will go again, shame the drive is so...
umm, this originally aired July 4th, 2006 http://www.finalgear.com/shows/topgear/8/5/
I'm going to Gran tourismo on wednesday to get my car aligned. Should I just let them do what they feel is best for my car or should I ask for...
damn! theres always m-coupes!
well your brake problem was fixed by the hard braking. Your rotors probably aren't very badly warped so the hard braking smoothed them out...
cool, what time you guys planning on? I can get that swaybar in.
awesome! If you guys want any help let me know, going to be pretty free/bored sunday.
here http://www.wrxatlanta.com/forums/forumdisplay.php?f=22
Updates!! Well with the help of Ped (:bowdown:) I finally got some springs installed. Sadly all did not go to plan. This is what I was planning...
http://www.linkognito.com/b.php?b=599 FTMFW!:cool:
Separate names with a comma.