doing water pump might as well do the belt and tensioner as well. I'd worry about the heat getting the head gaskets if rolling in a 98, regardless...
no more Russian/Chicom porn? How will Google make up for the limp ad sales?
do the levers move at all? try to move? if so then it may the plastic clips if not then check the other door lock button. If it works the locks...
have you pulled your door panels off in the past? there is a plastic clip that is more or less a pivot for the rods, check to see if those are...
smart guy would buy a blown car on the cheap and not get suckered by the illusion around the word "warranty"
Lemon Law is a tedious bitch involving intricate legalese, proper protocol and procedure. Dealers love it because it's designed to be so...
looks good further from here
supercharged XC90
where are the signs of high heat? sure as hell don't see it on the bearings, rods and crank. Low oil means high heat and don't see any of that....
car-part.com or just ride around on an off day and hit the local yards, I got a EJ255 fully dressed with turbo for $750 and it had only 36K on the...
2.5 on the way? http://www.rs25.com/forums/f128/t170271-1996-impreza-lx-awd-coupe-2-2-2-5-questions.html
welcome and good luck with that Brat
need to ask them why their motor was consuming so much oil and why that was not mentioned or noticed during any of the previous service visits?
just for entertainments sake do a compression and leak down and let us know how that goes... in the mean time don't drive it let alone start it.
what was the purpose of this thread?
pull your radiator then two side covers and check your timing marks
4EAT transmissions are decent out of the box and can be tweaked with the usual slushbox modifications... think you can do paddle shift mod with...
well I wouldn't just go do a set of wheels first time around unless you've painted before but PC is pretty damn easy.
also level the oven just like you would any other time make sure the powder has ZERO clumps and DO NOT pack or tamp it hit the hard to get areas...
Ideal is to hit it with light sand to more or less prep the surface if bare alloy. media blasting with glass contaminates the surface so don't do...
Separate names with a comma.