1/28 - Install day @ Milo's

Discussion in 'Meetups & Events' started by miloman, Dec 12, 2005.

  1. Meredith

    Meredith Banned

    I'll bring the breaker bar of justice!
     
  2. MarkM2016GTI

    MarkM2016GTI Supporting Member

    I will be there to hang out and help anyone who may need it. Man I love this wagon.....LOL....Milo, what type of food are you needing for this install day?.


    Mark
     
  3. Alex

    Alex Community Founder Staff Member

    WRX-WRC and myself will bring chilly, but it'd be great to see some other cold weather food there. Of course, burgers are always a hit. I am sure someone would love to volunteer to hang around the grill (free heater) and help cook.

    Beer is always a plus, maybe some thermoses filled with coffee or such if it is indeed truely is going to be that cold.
     
  4. miloman

    miloman Retired Admin

    like alex said, chilli and burgers have been the traditional food... if we could get a bunch of volunteers to get burgers and buns, that would be great... sodas and water would be good too along with some snacks like chips, salsa, etc

    coffee is better when its irish ;)
     
  5. lostinthewoods

    lostinthewoods Frisco Tx Baller

    That is super! Go Team !
     
  6. bigb996

    bigb996 teh Wannabe Mod

    how about firewood and a barrel for a bon fire?
     
  7. Alex

    Alex Community Founder Staff Member

    you know Im part irish too :naughty:
     
  8. mattprzy

    mattprzy Active Member

    what kinda soda does the gang like? i might be nice enough to buy a 12 or 24 pack, or two each depending how many are going to show up.
     
  9. GTscoob

    GTscoob Black is Beautiful

    If Ming's up for it we may be putting my roof rails onto his Saabaru and putting the smooth tops on my wagon.
     
  10. MarkM2016GTI

    MarkM2016GTI Supporting Member

    I will bring burgers and help cook!!!.


    Mark
     
  11. lostinthewoods

    lostinthewoods Frisco Tx Baller

    I will take up space and do absolutely nothing.. maybe drink a few cold ones :)
     
  12. wrxguy

    wrxguy Member

    All right im down with the install day. Do i need to bring any tools we mite need? Also i know that it going to be at Milo's but it would be helpful if i knew the address of how to get there.
     
  13. JPWRX

    JPWRX New Member

    I would like to come by, hang out, meet everyone, etc. Where is this place at?
     
  14. GTscoob

    GTscoob Black is Beautiful

    Right off Northside drive, very close to Tech. Real directions will be posted sooner to the date.
     
  15. JPWRX

    JPWRX New Member

    Alright great, thanks.
     
  16. Kokopelli

    Kokopelli Active Member

    I need to do an auto to manual tranny swap on my new SVX (porter's old one). I'd like to do it on the install day but I'm sure I would be missing a crucial part and I'd get stuck there.
     
  17. tward

    tward Member

    :wavey: Sounds like fun. I'm in ,i don't know if i will have any thing to install, but i'm good with my hands,and have some tools. letme know if I need to bring any thing !!
     
  18. JL889

    JL889 Pandastic!

    I'll swing by, I have a portable air compressor and air wrench for lugs and such if anyone needs to borrow.
     
  19. Alex

    Alex Community Founder Staff Member

    Its getting closer...
     
  20. WRXCoupe

    WRXCoupe Active Member

    If you think this is cold try changing an alternator in Chicago in January outside at night 10 below with windchill. This is a friggin heat wave brother!
    Well I will have a set of Fast Line Mud Flaps if that even counts. I'd love to lend a hand and learn though!
     
  21. miloman

    miloman Retired Admin

    i have detailed directions on my computer in atl... will post them up when i get back next week
     
  22. Alex

    Alex Community Founder Staff Member

    I can post some up if necessary Milo.
     
  23. monk

    monk <b>The Kitchen Ninja!!!!</b>

    if i can make this one, i'll bring a few large coffee thermoses and a little bottle of st brendans for those so inclined, along with tools and my limited knowledge of the wrx ;)

    along with a 150w inverter, tools (i have flex wrenches if anyone wants to adjust their teins) and a few extension cables, tire compressor, etc.

    maybe i'll make some soup too, any suggestions?
     
  24. miloman

    miloman Retired Admin

    go ahead if u want to... i have detailed directions from all the major interstates in atlanta... figured i'd just paste those and avoid the trouble of typing it all up again... i'll be back this coming weekend so we'll have plenty of time before the event
     
  25. Alex

    Alex Community Founder Staff Member

    Time for a little :beer: when ya get back ;)
     
  26. miloman

    miloman Retired Admin

    ummmmm beer... maybe this install day i'll break my tradition of being drunk all day and actually help wrench
     
  27. jason

    jason Member

    I have a meth kit I need to install, but I dont know if I can wait that long. Im also debating on getting an 18G before I get it tuned again with the meth kit. So I might have the turbo to install. Ill be there gegardless.
     
  28. Alex

    Alex Community Founder Staff Member

    No, you cant do that. I love answering the most popular queston of the day..."Hey Alex, where's Milo?" :keke:

    You get to hold the fort in the heat with the video games, I get to have the fun outside. Its quite the fair trade IMO :eek:
     
  29. miloman

    miloman Retired Admin

    well... since u insist ;)
     
  30. socrates42

    socrates42 Member

    ill bring myself and my tools
     
  31. Alex

    Alex Community Founder Staff Member

    Been a while since I've seen ya bud, it'll be great to have you come out.
     
  32. KingofSiam

    KingofSiam Member

    Well I might be able to make it to this one. :)

    So what would a noob like me be able to contribute/gain from something like this?
     
  33. Alex

    Alex Community Founder Staff Member

    Definately, any install day is an unbeatable learning experience for learning to work on a car.
     
  34. Superdude

    Superdude Active Member

    So my buddy Rich got his CIA for his tC. We don't have a clue about these things, so we're going to bring his car and parts and hope Eric shows up!
     
  35. Goose013

    Goose013 Member

    Hey, you guys think you could help me with my springs?
     
  36. BelvnAWD

    BelvnAWD I'm Vin, Bell-Vin...

    Might make this one, depends on the weather. If I can do it in my garage with the heater.....
     
  37. BlackAndBlue

    BlackAndBlue Member

    I got a bunch of stuff to do, I should be there

    we could try space heaters w/generators for the wusses
     
    Last edited: Jan 4, 2006
  38. scuby drew

    scuby drew techos ftws!!EEEE

    i have helped two friends with tC's install CAI, it really isnt all that bad, just takes a little time patience. i will be there to consume beer and would be happy to lend a hand
     
  39. WrxCrazy

    WrxCrazy Active Member

    well i couldn't wait aNYMORE.... i got sum stuff installed..
    3 gauges(& piller pod) my new turbo timer, new slk style mirrors, but i still got a rare sway bar, and other stuff i will have by then... well i'm bringing cold ones... what kind u all drink let me know..
     
  40. miloman

    miloman Retired Admin

    any kind of beer works ;)
     
  41. Superdude

    Superdude Active Member

    i've never been to one of these. what little details do we need to know about? i figure bring your own tools and any supplies needed. a 12 pack or 2 of 420's for all to enjoy :naughty:
    anything else? food? what time?
     
  42. Superdude

    Superdude Active Member

    AWESOME!!! then i can just work on my radio. this will be so cool. :bowdown: bunch of grease monkeys and cold beer!
     
  43. mattprzy

    mattprzy Active Member

    What? Bring your own tools?!
     
  44. Afande

    Afande Member

    Never been to one of these either but interested. I have a set of sway bars. So anything else I need to bring besides booze?
     
  45. pEd

    pEd This ain't no Piccadilly!

    There should be plenty of access to tools.
    I usually try to bring a good selection of tools to share.
    **Bring beer**
     
  46. miloman

    miloman Retired Admin

    just a reminder, we wont have access to a power outlet
     
  47. Superdude

    Superdude Active Member

    i do have a little 100watt power converter for my cig outlet. don't know if it strong enough for power tool.
     
  48. mattprzy

    mattprzy Active Member

    What about extentsion cables? I have lots of extentision cables. (seriously!) Or we can all bring our sets of extenstion cables to make the mile long extenstion cable.
     
    Last edited: Jan 6, 2006
  49. Alex

    Alex Community Founder Staff Member

    Didnt someone mention that they had an inverter?
     
  50. rolling_trip

    rolling_trip Active Member

    i have one in my car i will bring
     

Share This Page