mothespaceman's 2012 WRX build / progress:

Discussion in 'Member Journals & Project Build Stories' started by mothespaceman, Mar 1, 2014.

  1. mothespaceman

    mothespaceman Member

    As she sits now:

    -COBB Accessport
    -Cobb SF Intake
    -Invidia Q300 Exhaust
    -Enkei RPF-1 18x9.5 +38
    -20% Llumar tint all around w/ 50% full windshield
    -STI V-Limited front lip
    -HT Auto rear lips
    -Rally Armor Flaps (front only)

    [​IMG]
    Front SaveRite by malboinen, on Flickr

    [​IMG]
    right front save rite by malboinen, on Flickr
     
    Last edited: Mar 1, 2014
    mothespaceman, Mar 1, 2014
    #1
  2. mothespaceman

    mothespaceman Member

    Finally ordered and installed an Invidia Q300 exhaust. It sounds great, but drones like a MOTHER between 1.5k -2.5k, have any of you found a way to resolve this with sound deadening? Does it get a bit better after the exhaust fully breaks in?

    [​IMG]
    Q300 by malboinen, on Flickr

    Before / After -

    [​IMG]
    newexhaustvsstock by malboinen, on Flickr
     
    mothespaceman, Mar 1, 2014
    #2
  3. b reel

    b reel Active Member

    how much lower is that can compared to stock? It looks low in the center
     
    b reel, Mar 1, 2014
    #3
  4. mothespaceman

    mothespaceman Member

    Probably an 1/2'' to 1'' lower, or so it appears... It doesn't seem to be low enough to cause a problem.
     
    mothespaceman, Mar 1, 2014
    #4
  5. mothespaceman

    mothespaceman Member

    mothespaceman, Mar 2, 2014
    #5

Share This Page